The Analysis on Seepage Field of Grouted and Shotcrete Lined Underwater Tunnel
Open Access
- 5 May 2020
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-15
Abstract
Groundwater control in underwater tunnels by drilling and blasting method is generally carried out by grouting ring, shotcrete lining (primary lining), and concrete lining. The permeable grouting ring and shotcrete lining have an important impact on seepage field. However, the currently published research models of related results are for homogeneous and isotropic single-layer unlined tunnels, ignoring the important effects of tunnel grouting circles and primary lining. If the conclusions of the relevant literature are directly used to guide the tunnel design, large errors may occur. Therefore, on the basis of previous studies, this article extends the tunnel seepage research model and incorporates the tunnel grouting ring and primary lining into the research model. The research model is more in line with actual working conditions. Based on the principle of mirror method, the seepage field of a drainage tunnel in an infinite aquifer is superposed with that of a water supply tunnel in an infinite aquifer, and the analytical solution to the seepage field of an grouted and shotcrete lined underwater tunnel in a semi-infinite aquifer is obtained, which is further verified by numerical analysis and experiment. In addition, the influence of grouting ring and primary lining parameters on seepage field is discussed by using partial differential analysis. The results show that the seepage flow of tunnel can be significantly alleviated by either reducing the permeability coefficient of grouting ring and primary lining or increasing the thickness of grouting ring and primary lining, but the water pressure of grouting ring and primary lining will increase.Keywords
Funding Information
- National Natural Science Foundation of China (U1765204, 41772340)
- National Natural Science Foundation of China (U1765204, 41772340)
This publication has 20 references indexed in Scilit:
- Analytical Solution for Modeling Discharge into a Tunnel Drilled in a Heterogeneous Unconfined AquiferGroundwater, 2013
- Excavation-induced hydraulic conductivity reduction around a tunnel – Part 1: Guideline for estimate of ground water inflow rateTunnelling and Underground Space Technology, 2010
- Analytical solutions for steady seepage into an underwater circular tunnelTunnelling and Underground Space Technology, 2010
- Analytical solution for steady-state groundwater inflow into a drained circular tunnel in a semi-infinite aquifer: A revisitTunnelling and Underground Space Technology, 2008
- Seepage force in a drained circular tunnel: An analytical approachCanadian Geotechnical Journal, 2008
- A closed‐form solution for a confined flow into a tunnel during progressive drilling in a multi‐layer groundwater flow systemGeophysical Research Letters, 2007
- Groundwater ingress to tunnels – The exact analytical solutionTunnelling and Underground Space Technology, 2007
- Circular tunnel in a semi-infinite aquiferTunnelling and Underground Space Technology, 2003
- An Analytical Solution for Steady Flow into a TtonnelGroundwater, 1999
- Prediction of water flow into rock tunnels: an analytical solution assuming an hydraulic conductivity gradientInternational Journal of Rock Mechanics and Mining Sciences, 1993