Performance of Polymer Electrolyte Fuel Cell Electrodes with Atomically Dispersed (AD) Fe-C-N ORR Catalyst
- 4 October 2019
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166 (14) , F1096-F1104
Abstract
Activity of (AD)Fe-N-C catalyst with low Fe content is investigated in differential cells prepared by hot pressing anode gas diffusion electrodes (0.2 mgPt/cm2) to N211 membrane and brush painting the cathode catalyst ink. Polarization curves obtained in H2/O2 show double Tafel slopes which, in conjunction with the redox potential observed in cyclic voltammetry traces, forms the basis for a distributed ORR (oxygen reduction reaction) kinetic model with potential-dependent available sites. Application of this model to polarization data in H2/air provides the basis for formulating an oxygen transport model and leads to 7.7 ± 0.6 mA/cm2 catalyst activity at 0.9 V, 31.5–34.3 mA/cm2 cell performance at 0.8 V, and 0.8-2 s/cm O2 transport resistance. A coupled kinetic, O2 transport and proton transport illustrates the projected improvements needed in catalyst activity and electrode structure to approach the automotive target of 1000 mW/cm2 stack power density while meeting the 1.45 kW/°C heat rejection constraint at 1.5 cathode stoichiometry. The model indicates that we need twelve-fold higher mass activity for reducing the kinetic losses, doubling of active site density and an engineered electrode structure for 50% lower proton transport resistance, as well as a 50% reduction in electrode thickness to limit the O2 transport losses.Keywords
This publication has 33 references indexed in Scilit:
- Progress in the Development of Fe‐Based PGM‐Free Electrocatalysts for the Oxygen Reduction ReactionAdvanced Materials, 2019
- Direct hydrogen fuel cell electric vehicle cost analysis: System and high-volume manufacturing description, validation, and outlookJournal of Power Sources, 2018
- ElectroCat: DOE's approach to PGM-free catalyst and electrode R&DSolid State Ionics, 2018
- Single Atomic Iron Catalysts for Oxygen Reduction in Acidic Media: Particle Size Control and Thermal ActivationJournal of the American Chemical Society, 2017
- Direct atomic-level insight into the active sites of a high-performance PGM-free ORR catalystScience, 2017
- Current challenge and perspective of PGM-free cathode catalysts for PEM fuel cellsFrontiers in Energy, 2017
- Engineering nanostructures of PGM-free oxygen-reduction catalysts using metal-organic frameworksNano Energy, 2017
- Recent advances in the design of tailored nanomaterials for efficient oxygen reduction reactionNano Energy, 2016
- Recent Advances in Electrocatalysts for Oxygen Reduction ReactionChemical Reviews, 2016
- A review on non-precious metal electrocatalysts for PEM fuel cellsEnergy & Environmental Science, 2011