Protocol for Testing Flexural Strength, Flexural Modulus, and Fatigue Failure of Cementitiously Stabilized Materials Using Third-Point Flexural Beam Tests
Authors:
- 1 January 2016
- journal article
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 39 (1) , 91-105
Abstract
In this study, a testing protocol was developed to measure the flexural strength, flexural modulus, and fatigue failure of cementitiously stabilized materials (CSMs) for both lightly and heavily stabilized soils. Four soils (sand, gravel, silt, and clay) and four binders (cement, lime, class C fly ash, and class F fly ash) were used in this study. Beam specimens (100 mm high by 100 mm wide by 400 mm long) were prepared and tested using third-point flexural beam tests. A fatigue distress model was developed, and the data from this study was validated using other existing stress-based fatigue models. Results indicated that the testing protocol could be used to determine the flexural strength, flexural modulus, and fatigue behavior of the cementitiously stabilized layers (CSL). A stress-based fatigue performance model was a good fit for the whole range of CSMs, which is needed to predict the fatigue performance of CSL in the field and to determine the fatigue life of the CSLs.Keywords
This publication has 9 references indexed in Scilit:
- Characterization of Cementitiously Stabilized Layers for Use in Pavement Design and Analysis2014
- Experimental Research on Pavement Performance of Cement Stabilized Base Recycled MixtureApplied Mechanics and Materials, 2011
- Study on Flexural Strength and Flexural Modulus of Elasticity of Cement Stabilized AggregateAdvanced Materials Research, 2011
- Study on Fatigue Life of Lime Fly-Ash Treated Aggregate Based on SHRP StandardAdvanced Materials Research, 2011
- Investigation of Flexural Properties of Cement-Stabilized Macadam Reinforced with Polypropylene FiberJournal of Materials in Civil Engineering, 2010
- Review of Fatigue Models for Concrete Airfield Pavement Design2004
- Fatigue Behavior of a Pavement Foundation with Recycled Aggregate and Waste HDPE StripsJournal of Geotechnical and Geoenvironmental Engineering, 2003
- A Mechanistic Model for Strength and Fatigue of Cement-Treated SoilsGeotechnical Testing Journal, 1981
- ZERO-MAINTENANCE DESIGN FOR PLAIN JOINTED CONCRETE PAVEMENTSProceedings of the International Conference on Concrete Pavements, 1977