Preparation of a nanosilica cross‐linker and investigation of its effect on properties of guar gum fracturing fluid
Authors:
Open Access
- 1 July 2017
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 12 (7) , 445-449
Abstract
The development of hydraulic fracturing has created a huge demand for fracturing fluids with high performance and low formation damage in recent years. A nanosilica cross‐linker precursor (NCP) was prepared by introducing boric acid to the surface of organic silica compound (C 9 H 23 NO 3 Si, a silane coupling agent), the carrier. As‐obtained NCP was transformed into nanoparticles (NPs) with a diameter of 10–35 nm by self‐aggregation. The resultant NPs were used to crosslink low concentration of guar gum solution in order to improve the rheological and breaking properties of the fracturing fluid made of the NPs‐cross‐linked guar gum gels. Findings indicate that boric acid chemically reacts with the amino group of the silane coupling agent forming N–B bond via infrared analysis. The viscosity of NPs‐cross‐linked guar gum gels increases with the increase of particle size of NPs, which means that the particle size of NPs has a significant effect on the cross‐linking efficacy, the guar gum gels cross‐linked by a proper mass fractions of NPs exhibits good temperature resistance and shear resistance via rheometer. Moreover, the NPs‐cross‐linked guar gum gels possesses better breaking behaviour than the one cross‐linked by borate.Keywords
This publication has 18 references indexed in Scilit:
- The Origins of Low‐Fracture Conductivity in Soft Shale Formations: An Experimental StudyEnergy Technology, 2015
- Water Loss Versus Soaking Time: Spontaneous Imbibition in Tight RocksEnergy Technology, 2014
- Patent Analysis of Shale Gas Technology in China and Implications for its ExploitationEnergy Technology, 2014
- Slickwater Fracturing: Food for ThoughtSPE Production & Operations, 2010
- Fracture Impact of Yield Stress and Fracture-Face Damage on Production With a Three-Phase 2D ModelSPE Production & Operations, 2009
- Analysis of a deformable fracture in permeable materialInternational Journal for Numerical and Analytical Methods in Geomechanics, 2006
- Determination of the mode and efficacy of the cross-linking of guar by borate using MAS11B NMR of borate cross-linked guar in combination with solution11B NMR of model systemsDalton Transactions, 2004
- Suspension characteristics of borate‐crosslinked gels: Rheology and atomic force microscopy measurementsJournal of Applied Polymer Science, 2001
- Chemistry and Rheology of Borate-Crosslinked Fluids at Temperatures to 300FJournal of Petroleum Technology, 1993
- Comparison of galactomannan crosslinking with organotitanates and boratesColloid and Polymer Science, 1988