Porosity Analysis of Additive Manufactured Parts Using CAQ Technology
Open Access
Abstract
Components produced by additive technology are implemented in various spheres of industry, such as automotive or aerospace. This manufacturing process can lead to making highly optimized parts. There is not enough information about the quality of the parts produced by additive technologies, especially those made from metal powder. The research in this article deals with the porosity of components produced by additive technologies. The components used for the research were manufactured by the selective laser melting (SLM) method. The shape of these components is the same as the shape used for the tensile test. The investigated parts were printed with orientation in two directions, Z and XZ with respect to the machine platform. The printing strategy was “stripe”. The material used for printing of the parts was SS 316L-0407. The printing parameters were laser power of 200 W, scanning speed of 650 mm/s, and the thickness of the layer was 50 µm. A non-destructive method was used for the components’ porosity evaluation. The scanning was performed by CT machine METROTOM 1500. The radiation parameters used for getting 3D scans were voltage 180 kV, current 900 µA, detector resolution 1024 × 1024 px, voxel size 119.43 µm, number of projections 1050, and integration time 2000 ms. This entire measurement process responds to the computer aided quality (CAQ) technology. VG studio MAX 3.0 software was used to evaluate the obtained data. The porosity of the parts with Z and XZ orientation was also evaluated for parts’ thicknesses of 1, 2, and 3 mm, respectively. It has been proven by this experimental investigation that the printing direction of the part in the additive manufacturing process under question affects its porosity.Keywords
Funding Information
- Structural Funds of the European Union and project (CZ.02.1.01/0.0/0.0/17_049/0008407)
This publication has 25 references indexed in Scilit:
- Effect of Annealing Heat Treatment on the Microstructural Evolution and Mechanical Properties of Hot Isostatic Pressed 316L Stainless Steel Fabricated by Laser Powder Bed FusionMetals, 2020
- Influence of Scanning Strategy Parameters on Residual Stress in the SLM Process According to the Bridge Curvature Method for AISI 316L Stainless SteelMaterials, 2020
- Steels in additive manufacturing: A review of their microstructure and propertiesMaterials Science and Engineering: A, 2020
- INFLUENCE OF BASIC PROCESS PARAMETERS ON MECHANICAL AND INTERNAL PROPERTIES OF 316L STEEL IN SLM PROCESS FOR RENISHAW AM400MM Science Journal, 2019
- On the Anisotropic Mechanical Properties of Selective Laser-Melted Stainless SteelMaterials, 2017
- Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser MeltingJournal of Materials Science & Technology, 2016
- Anisotropy of Mechanical Properties and its Correlation with the Structure of the Stainless Steel 316L Produced by the SLM MethodPhysics Procedia, 2016
- Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steelMaterials Science and Engineering: A, 2015
- The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloyJournal of Alloys and Compounds, 2014
- Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser meltingThe International Journal of Advanced Manufacturing Technology, 2014