On Toughness and Stiffness of Poly(butylene terephthalate) with Epoxide‐Containing Elastomer by Reactive Extrusion
- 2 August 2004
- journal article
- research article
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 289 (8) , 763-770
Abstract
Summary: To obtain a balance between toughness (as measured by notched impact strength) and elastic stiffness of poly(butylene terephthalate) (PBT), a small amount of tetra‐functional epoxy monomer was incorporated into PBT/[ethylene/methyl acrylate/glycidyl methacrylate terpolymer (E‐MA‐GMA)] blends during the reactive extrusion process. The effectiveness of toughening by E‐MA‐GMA and the effect of the epoxy monomer were investigated. It was found that E‐MA‐GMA was finely dispersed in PBT matrix, whose toughness was significantly enhanced, but the stiffness decreased linearly, with increasing E‐MA‐GMA content. Addition of 0.2 phr epoxy monomer was noted to further improve the dispersion of E‐MA‐GMA particles by increasing the viscosity of the PBT matrix. While use of epoxy monomer had little influence on the notched impact strength of the blends, there was a distinct increase in the elastic stiffness. SEM micrographs of impact‐fracture surfaces indicated that extensive matrix shear yielding was the main impact energy dissipation mechanism in both types of blends, with or without epoxy monomer, and containing 20 wt.‐% or more elastomer. SEM micrographs of freeze‐fractured surfaces of PBT/E‐MA‐GMA blend illustrating the finer dispersion of E‐MA‐GMA in the presence of epoxy monomer. magnified image SEM micrographs of freeze‐fractured surfaces of PBT/E‐MA‐GMA blend illustrating the finer dispersion of E‐MA‐GMA in the presence of epoxy monomer.Keywords
This publication has 31 references indexed in Scilit:
- Critical inter-particle distance dependence and super-toughness in poly(butylene terephthalate)/grafted poly(ethylene-octene) copolymer blends by means of polyarylate additionPolymer, 2003
- Stiffer and super-tough poly(butylene terephthalate) based blends by modification with phenoxy and maleated poly(ethylene–octene) copolymersPolymer, 2003
- Ultimate mechanical properties of rubber toughened semicrystalline PET at room temperaturePolymer, 2002
- On compatibilization and toughening of a copolyester with a maleated thermoplastic elastomerPolymer, 2002
- Hygrothermal aging and fracture behavior of styrene-acrylonitrile/acrylate based core-shell rubber toughened poly(butylene terephthalate)Journal of Applied Polymer Science, 1999
- Effect of PBT melt viscosity on the morphology and mechanical properties of compatibilized and uncompatibilized blends with ABSPolymer, 1999
- Toughening of poly(butylene terephthalate) with epoxidized ethylene propylene diene rubberPolymer, 1997
- Toughened thermoplastics: 3. Blends of poly(butylene terephthalate) with (butadiene-co-acrylonitrile) rubbersPolymer, 1995
- The importance of constraint relief caused by rubber cavitation in the toughening of epoxyJournal of Materials Science, 1993
- Rubber toughened polybutylene terephthalate: influence of processing on morphology and impact propertiesPolymer, 1990