Wheel Wear Modeling and Re-Profiling Strategy Optimization Based on the Maintenance Data of a Three-Axle Bogie Locomotive
Authors:
- 24 July 2024
- journal article
- research article
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2679 (2) , 602-618
Abstract
Wear caused by wheel–rail contact forces is inevitable during vehicle operation, which has an important impact on the security and stability of train operation. Therefore, it is of great significance to study wheel wear patterns and optimize re-profiling strategies to extend service life. Based on the wheel wear data of three-axle bogie locomotives, this paper proposes a data-driven hybrid wheel wear model and optimization schemes of the re-profiling strategy. The wear model consists of a wheel flange thickness wear model, a wheel diameter wear model, and a re-profiling ratio coefficient model. Then, utilizing the above models, the optimization of the re-profiling strategy for different axle position wheels is raised, and the optimization of the complete vehicle re-profiling strategy is presented by considering the wheel diameter difference. Finally, a wheel data-driven analysis platform was developed to enable the management and utilization of wheel maintenance data. Analysis of extensive maintenance data indicates that the guide wheels wear the fastest, approximately 22.2% higher than the middle wheels, which wear the slowest. The re-profiling ratio coefficient model indicates that the ratio coefficient increases as the wheel flange thickness before re-profiling increases. Simulations demonstrate a longer expected wheel life with a flange thickness between 28 and 32.5 mm. Compared to measured values, the optimization strategy reduces complete vehicle re-profiling by 21.5%. Through the initial implementation at CRRC Dalian Locomotive Ltd, it has become evident that this methodology offers a viable solution to enhance the service longevity of locomotive wheels.Keywords
Funding Information
- National Natural Science Foundation of China under Grant (52271023)
- Scientific Research Project of Education Department of Liaoning Province (LJKZ0493)
- Dalian Science and Technology Innovation Fund Application Basic Research Project (2022JJ12GX029)
This publication has 35 references indexed in Scilit:
- Multivariate statistical aggregation and dimensionality reduction techniques to improve monitoring and maintenance in railways: The wheelset componentReliability Engineering & System Safety, 2021
- Effects of wheel–rail contact modelling on wheel wear simulationWear, 2016
- Study on wear and rolling contact fatigue behaviors of wheel/rail materials under different slip ratio conditionsWear, 2016
- Optimizing the re-profiling strategy of metro wheels based on a data-driven wear modelEuropean Journal of Operational Research, 2015
- Investigation on wear and damage performance of laser cladding Co-based alloy on single wheel or rail materialWear, 2015
- Application of the semi-Hertzian method to the prediction of wheel wear in heavy haul freight carWear, 2014
- Comparison of non-elliptic contact models: Towards fast and accurate modelling of wheel–rail contactWear, 2014
- The Research on Management Informationization of Railway Construction Project2013
- Development of a model for the simultaneous analysis of wheel and rail wear in railway systemsMultibody System Dynamics, 2013
- Development of a wear model for the prediction of wheel and rail profile evolution in railway systemsWear, 2012