Chemical bonding of nitrogen in low energy high flux implanted austenitic stainless steel
Authors:
- 15 May 2002
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 91 (10) , 6361-6366
Abstract
AISI 304L austenitic stainless steel was implanted at 400 °C with 1.2 keV nitrogen ions using a high beam current density of 1 mA/cm2. The nitrogen depth profile, structure, and chemical composition in the modified surface layer were determined by nuclear reaction analysis (NRA) and x-ray diffraction (XRD). The chemical bonding of Fe, Cr atoms with nitrogen was investigated by x-ray photoelectron spectroscopy (XPS). For a treatment time of 1 h, the formation of a thick nitrided layer of about 3.5 μm with a high nitrogen content (∼20 at. %) is observed by NRA. The nitrogen depth profile is characterized by a nearly flat shape over a thickness of 2.5 μm followed by an abrupt decrease. XRD spectra show the formation in the nitrided layer of a phase usually called expanded austenite which corresponds fairly well with a nitrogen solid solution of the fcc structure containing a high density of stacking faults. The XPS study of the and binding states indicate clearly the preferential bonding of chromium with nitrogen with a binding energy of about 1 eV. This value, which is lower than the expected one for chromium nitride CrN, would be characteristic of the binding energy of nitrogen with Cr in the expanded austenite phase. Moreover, it has been found that the atomic ratio N/Cr in the nitride layer deduced from both NRA and XPS is very close to 1. These experimental results support the specific role of chromium in the mechanisms of atomic transport of nitrogen over long distances at moderate temperature in austenitic stainless steels.
Keywords
This publication has 16 references indexed in Scilit:
- Nitrogen and carbon expanded austenite produced by PI3Surface and Coatings Technology, 2001
- Surface processes and diffusion mechanisms of ion nitriding of stainless steel and aluminiumSurface and Coatings Technology, 2001
- On the mechanism of ion nitriding of an austenitic stainless steelSurface and Coatings Technology, 2001
- The nature of expanded austeniteSurface and Coatings Technology, 2000
- Plasma immersion ion implantation of stainless steel: austenitic stainless steel in comparison to austenitic-ferritic stainless steelSurface and Coatings Technology, 1996
- Changing the tribological performance of steels using low energy, high temperature nitrogen ion implantationSurface and Coatings Technology, 1996
- Phase and composition depth distribution analyses of low energy, high flux N implanted stainless steelJournal of Applied Physics, 1995
- Microstructure and corrosion of nitrogen implanted AISI 304 stainless steelSurface and Coatings Technology, 1992
- XPS study of the passive films formed on nitrogen-implanted austenitic stainless steelsApplied Surface Science, 1992
- Quantitative electron spectroscopy of surfaces: A standard data base for electron inelastic mean free paths in solidsSurface and Interface Analysis, 1979