Nitride bonded silicon nitride as a reusable crucible material for directional solidification of silicon
- 10 September 2015
- journal article
- research article
- Published by Wiley in Crystal Research and Technology
- Vol. 51 (1) , 74-86
Abstract
Nitride bonded silicon nitride (NBSN) has the potential of a reusable crucible material for directional solidification of silicon. This is demonstrated in this work by reusing a NBSN crucible six times for the directional solidification of undoped multicrystalline (mc) silicon ingots. The progress of the ingot contamination at subsequent use of the NBSN crucible was studied systematically. Minority carrier lifetime, electrical resistivity as well as impurity content were analyzed after each solidification run. The results were compared to those obtained from ingots which were crystallized by using identical directional solidification process parameters in standard fused silica crucibles with silicon nitride coating. The impurity content of the ingots can be clearly correlated to the impurity content of the NBSN crucible. The main impurity is the acceptor B. Its concentration in the ingots decreases from about 1017 atoms/cm3 to 1016 atoms/cm3 with continued reuse. The contamination mechanism is most likely due to outdiffusion from the crucible wall into the Si melt.Keywords
Funding Information
- Schott Solar Wafer GmbH
This publication has 15 references indexed in Scilit:
- Modeling majority carrier mobility in compensated crystalline silicon for solar cellsSolar Energy Materials and Solar Cells, 2012
- About the formation and avoidance of C and N related precipitates during directional solidification of multi-crystalline silicon from contaminated feedstockJournal of Crystal Growth, 2010
- Use of silicon oxynitride as a graphite mold releasing coating for the growth of shaped multicrystalline silicon crystalsJournal of Crystal Growth, 1994
- GDMS1992
- Effective Segregation Coefficient of Boron in Silicon Ingots Grown by the Czochralski and Bridgman TechniquesJournal of the Electrochemical Society, 1984
- A reusable mold in directional solidification for silicon solar cellsSolar Energy Materials, 1983
- Development and evaluation of refractory CVD coatings as contact materials for molten siliconJournal of Crystal Growth, 1980
- Reaction-bonded silicon nitride: its formation and propertiesJournal of Materials Science, 1979
- Diffusion of aluminum into silicon nitride filmsThin Solid Films, 1978
- The Erosion of Materials in Molten SiliconJournal of the Electrochemical Society, 1976