Solid Oxide Fuel Cells with Magnetron Sputtered Single-Layer SDC and Multilayer SDC/YSZ/SDC Electrolytes
Open Access
Abstract
Samarium-doped ceria (SDC) is considered as an alternative electrolyte material for intermediate-temperature solid oxide fuel cells (IT-SOFCs) because its conductivity is higher than that of commonly used yttria-stabilized zirconia (YSZ). The paper compares the properties of anode-supported SOFCs with magnetron sputtered single-layer SDC and multilayer SDC/YSZ/SDC thin-film electrolyte, with the YSZ blocking layer 0.5, 1, and 1.5 μm thick. The thickness of the upper and lower SDC layers of the multilayer electrolyte are constant and amount to 3 and 1 μm, respectively. The thickness of single-layer SDC electrolyte is 5.5 μm. The SOFC performance is studied by measuring current–voltage characteristics and impedance spectra in the range of 500–800 °C. X-ray diffraction and scanning electron microscopy are used to investigate the structure of the deposited electrolyte and other fuel cell layers. SOFCs with the single-layer SDC electrolyte show the best performance at 650 °C. At this temperature, open circuit voltage and maximum power density are 0.8 V and 651 mW/cm2, respectively. The formation of the SDC electrolyte with the YSZ blocking layer improves the open circuit voltage up to 1.1 V and increases the maximum power density at the temperatures over 600 °C. It is shown that the optimal thickness of the YSZ blocking layer is 1 µm. The fuel cell with the multilayer SDC/YSZ/SDC electrolyte, with the layer thicknesses of 3/1/1 µm, has the maximum power density of 2263 and 1132 mW/cm2 at 800 and 650 °C, respectively.Keywords
Funding Information
- the Ministry of Science and Higher Education of the Russian Federation (075-15-2021-1348, 2.1.2)
This publication has 50 references indexed in Scilit:
- On the Identification of Impedance Spectroscopy Processes of an SOFC Under Different Hydrogen ConcentrationsJournal of Fuel Cell Science and Technology, 2012
- Electrochemical Impedance Spectroscopy Analysis of an Anode-Supported Microtubular Solid Oxide Fuel CellJournal of the Electrochemical Society, 2010
- Low-Temperature Anode-Supported SOFC with Ultra-Thin Ceria-Based Electrolytes Prepared by Modified Sol-Gel RouteJournal of Solid Mechanics and Materials Engineering, 2010
- Optimized La0.6Sr0.4CoO3–δ Thin‐Film Electrodes with Extremely Fast Oxygen‐Reduction KineticsAdvanced Functional Materials, 2009
- Preparation of Doped Ceria Electrolyte Films for SOFCs by Spray Coating MethodJournal of Dispersion Science and Technology, 2009
- Simulation of Electrochemical Impedance Spectra of Solid Oxide Fuel Cells Using Transient Physical ModelsJournal of the Electrochemical Society, 2008
- Fabrication of bilayered YSZ/SDC electrolyte film by electrophoretic deposition for reduced-temperature operating anode-supported SOFCJournal of Power Sources, 2007
- Internal shorting and fuel loss of a low temperature solid oxide fuel cell with SDC electrolyteJournal of Power Sources, 2007
- Fabrication and characterization of thin film electrolytes deposited by RF magnetron sputtering for low temperature solid oxide fuel cellsJournal of Power Sources, 2006
- Ln0.4Sr0.6Co0.8Fe0.2O3− (Ln=La, Pr, Nd, Sm, Gd) for the electrode in solid oxide fuel cellsSolid State Ionics, 1999