Influence of glass beads filler and orientation process on piezoelectric properties of polyethylene composites
Open Access
- 15 November 2019
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 30 (24) , 21032-21047
Abstract
The effect of silica filler (in the form of glass beads) on polyethylene composite properties has been studied. Conditions for obtaining polyethylene-based composites in the extrusion process were developed. Two types of such composites were prepared: non-oriented and oriented in the uniaxial stretching process in a ratio of 3:1. The morphology, microstructure (including crystallinity degree), mechanical resistance, and thermal stability of the obtained composites containing 2.5–10% of the filler were analyzed by the scanning electron microscopy connected with energy dispersive X-ray analysis, X-ray diffraction, differential scanning calorimetry, thermogravimetry methods, and tensile tests. In order to induce piezoelectric effect, the samples were charged with a direct current of 100 V/μm at 85 °C. The piezoelectric properties of the polyethylene composites were determined by the measurement of charge and voltage of current generated during action of stress up to 120 kPa. Piezoelectric coefficients, d33 and g33, versus applied stress were determined and the stability of electrets stored during 2–5 months was tested too. The best piezoelectric properties were found for medium-density polyethylene composite containing 5% of glass beads.Keywords
Funding Information
- Narodowe Centrum Nauki (2015/17/B/ST8/03396)
This publication has 35 references indexed in Scilit:
- Cavitation during deformation of semicrystalline polymersProgress in Polymer Science, 2014
- Controlling Cavitation of Semicrystalline Polymers during Tensile DrawingMacromolecules, 2011
- Fracture Toughness of Polypropylene-Based Particulate CompositesMaterials, 2009
- Crystallinity Behavior of MDPE-Clay Nanocomposites Fabricated using Ball Milling MethodJournal of Composite Materials, 2009
- High Pressure Crystallization of HDPE DropletsMacromolecules, 2008
- Piezoelectric Polymers and Their Applications2008
- Characteristics of Energy Storage Devices in Piezoelectric Energy Harvesting SystemsJournal of Intelligent Material Systems and Structures, 2007
- Copolymerization of ethylene with 1‐hexene over metallocene catalyst supported on complex of magnesium chloride with tetrahydrofuranJournal of Polymer Science Part A: Polymer Chemistry, 2004
- Microstructure of ethylene-1-hexene and ethylene-1-octene copolymers obtained over Ziegler–Natta catalysts supported on MgCl 2 (THF) 2Polymer, 2001
- Analysis of the polarity of silica surfaces as reaction media. Behavior of adsorbed solvatochromic indicatorsThe Journal of Organic Chemistry, 1985