Asymmetrical Elongation of Branched Alkyl Chains in Non‐Fullerene Acceptors for Large‐Area Organic Solar Modules
- 18 July 2024
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (44)
Abstract
With the drive toward the development of large‐area organic solar cells (OSCs), there is a critical need for advanced fabrication techniques that ensure both their efficiency and scalability. In particular, a shift from toxic halogenated solvents to safer non‐halogenated alternatives such as o‐xylene, which have lower environmental and health impacts, is required. However, transitioning to non‐halogenated solvents can lead to serious problems, including aggregation within the active layer, which compromises film morphology and the resulting efficiency of OSCs. To address this aggregation, in the present study, the 2‐ethylhexyl (EH) groups in L8‐BO(EH‐EH) are replaced with longer chains (2‐heptylundecyl [HU], 2‐decyltetradecyl [DT], and 2‐dodecylhexadecyl [DH] groups) to synthesize the non‐fullerene acceptors (NFAs) of L8‐BO(HU‐HU), L8‐BO(HU‐DT), and L8‐BO(HU‐DH). The NFAs with the longer alkyl chains are highly soluble in o‐xylene and produce highly uniform films, making them more suitable for use in large‐area OSCs. Using the NFAs, slot‐die‐coated organic solar modules with an active area of 200 cm2 are fabricated; the L8‐BO(HU‐DT)‐based module exhibits an impressive power conversion efficiency of 11.44%. This work thus underscores the asymmetrical elongation of alkyl chains in the NFAs to mitigate severe NFA phase separation and improve film printability in the practical production of organic solar modules.Keywords
Funding Information
- National Research Foundation of Korea
- Ministry of Science and ICT, South Korea (NRF‐2018R1A5A1025594, 2020M1A2A2080746, 2023R1A2C3006550, 2020M1A2A2080748)
This publication has 51 references indexed in Scilit:
- Slot‐Die Coating for Scalable Fabrication of Perovskite Solar Cells and ModulesAdvanced Materials Technologies, 2024
- Over 18% Efficiency Ternary Organic Solar Cells with 300 nm Thick Active Layer Enabled by an Oligomeric AcceptorAdvanced Materials, 2023
- Thermally‐Induced Degradation in PM6:Y6‐Based Bulk Heterojunction Organic Solar CellsAdvanced Functional Materials, 2023
- Efficient and Scalable Large‐Area Organic Solar Cells by Asymmetric Nonfullerene Acceptors Based on 9H‐Indeno[1,2‐b]pyrazine‐2,3,8‐TricarbonitrileAdvanced Functional Materials, 2023
- All Slot‐Die Coated Non‐Fullerene Organic Solar Cells with PCE 11%Advanced Functional Materials, 2021
- Latest Progress on Photoabsorbent Materials for Multifunctional Semitransparent Organic Solar CellsAdvanced Functional Materials, 2021
- Low Temperature Aggregation Transitions in N3 and Y6 Acceptors Enable Double‐Annealing Method That Yields Hierarchical Morphology and Superior Efficiency in Nonfullerene Organic Solar CellsAdvanced Functional Materials, 2020
- Emergent Nonreciprocal Circularly Polarized Emission from an Organic Thin FilmAdvanced Materials, 2020
- Single‐Junction Organic Photovoltaic Cells with Approaching 18% EfficiencyAdvanced Materials, 2020
- Highly Efficient, Stable, and Ductile Ternary Nonfullerene Organic Solar Cells from a Two‐Donor Polymer BlendAdvanced Materials, 2019