Evaluating Processing Parameter Effects on Polymer Grades and Plastic Coloring: Insights from Experimental Design and Characterization Studies
Open Access
Abstract
Resolving material and processing issues is essential to improving formulations and attaining accurate color matching in blending. Two transparent polycarbonate resins made up the blend: PC1, which made up 33% of the mixture with a Melt Flow Index (MFI) of 25 g/min, and PC2, which made up 67% of the mixture with an MFI of 65 g/min. This study employed data mining and a well-structured experiment using Design of Experiment (DoE) software-8 to investigate the effects of various processing temperatures on identical material formulations. The primary objective was to understand the influence of the operating conditions on the viscosity of a red letdown pigment made of polycarbonate, both with additive (WA) and without additive (WOA). The study analyzed the effects of processing parameters and rheological properties using a co-rotating twin-screw extruder. Rheology, Fourier-Transform Infrared Spectroscopy (FTIR), and Scanning Electron Microscopy (SEM) were employed to compare results and evaluate their impact on minimizing color discrepancies and improving Single-Pass Color Uniformity.Keywords
This publication has 37 references indexed in Scilit:
- UV Aging Effects on Polycarbonate PropertiesJournal of Failure Analysis and Prevention, 2020
- Comparison of Rheological Characteristics and Mechanical Properties of Fossil-Based and Bio-Based PolycarbonateMacromolecular Research, 2020
- Systematic review: Impact of processing parameters on dispersion of polycarbonate Composites, and pigment characterized by different techniquesMaterials Today: Proceedings, 2020
- Investigation of the effects of Formulation, process parameters, Dispersions, and Rheology on using combined Modelling and experimental SimulationsMaterials Today: Proceedings, 2019
- Processing issues of color mismatch: Rheological characterization of polycarbonate blendsPolymer Engineering & Science, 2014
- Rheological characterization of melt processed polycarbonate-multiwalled carbon nanotube compositesJournal of Non-Newtonian Fluid Mechanics, 2005
- Industrial Inorganic Pigments2005
- Experimental investigation of dispersion during flow of multi-walled carbon nanotube/polymer suspension in fibrous porous mediaCarbon, 2004
- Role of processing aids in the extrusion of molten polymersJournal of Vinyl and Additive Technology, 2002
- Distributive mixing in a single‐screw extruder—evaluation in the flow directionPolymer Engineering & Science, 2001