Effects of the impeller–volute tongue interaction on the internal flow in a low-specific-speed centrifugal pump with splitter blades
Authors:
- 3 July 2017
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 232 (2) , 170-180
Abstract
To investigate the effects of the main blades and splitter blades interacting with the volute tongue on the internal flow in a low-specific-speed centrifugal pump, the Reynolds-averaged Navier–Stokes equation, coupled with SST k-ω turbulence model, is employed to simulate the transient turbulent flow in the whole flow passage. The numerical simulation results have been verified with the experimental measurements by comparing the head and efficiency. The pressure fluctuation caused by impeller–volute tongue interaction, including time–history and frequency characteristics, is calculated and analyzed at five monitoring points adjoining the impeller outlet and tongue, as well as the torque of a single main blade and a single splitter blade. After that, both the energy loss and vorticity distributions on the middle section are discussed when the impeller rotates to four circumferential positions relative to the cutwater. The results show that the maximum pressures at the monitoring points occur before the blades reach the closest circumferential position with respect to the cutwater, and the peak pressure near the trailing edge of splitter blades is larger than main blades. There is only one torque peak of a single blade in one revolution when the angle between the monitoring blade and tongue is about 15°. Additionally, the torque peak arises before the torque valley, but the pressure valley at monitoring points in the impeller comes earlier than the pressure peak. Both the energy loss and vorticity are enlarged around the volute tongue evidently after the blades pass by the cutwater, and the splitter blades produce more unsteadiness and energy dissipation than main blades.Keywords
Funding Information
- National Natural Science Foundation of China (Grant No. 51409123)
- Natural Science Foundation of Jiangsu Province (Grant No. BK20140554)
This publication has 11 references indexed in Scilit:
- Experimental and numerical investigations of head-flow curve instability of a single-stage centrifugal pump with volute casingProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2016
- Investigation of Rotor-Stator Interaction and Flow Unsteadiness in a Low Specific Speed Centrifugal PumpStrojniški vestnik - Journal of Mechanical Engineering, 2016
- An Experimental Study of the Flow Field Inside the Diffuser Passage of a Laboratory Centrifugal PumpJournal of Fluids Engineering, 2015
- Numerical and experimental investigations on the cavitation characteristics of a high-speed centrifugal pump with a splitter-blade inducerJournal of Mechanical Science and Technology, 2015
- Transient numerical analysis of rotor–stator interaction in a Francis turbineRenewable Energy, 2014
- Performance analysis of mini centrifugal pump with splitter bladesJournal of Thermal Science, 2013
- Large-eddy simulation analysis of mechanisms for viscous losses in a turbomachinery tip-clearance flowJournal of Fluid Mechanics, 2007
- Artificial neural network based modeling of performance characteristics of deep well pumps with splitter bladeEnergy Conversion and Management, 2006
- Energy saving in a deep well pump with splitter bladeEnergy Conversion and Management, 2006
- On the identification of a vortexJournal of Fluid Mechanics, 1995