In-Situ, On-Demand Lubrication System for Space Mechanisms
Authors:
- 1 January 2003
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 46 (3) , 452-459
Abstract
Many of today's spaceraft have long mission lifetimes. Whatever the lubrication method selected, the initial lubricant charge is required to last the entire mission. Fluid lubricant losses are mainly due to evaporation, tribo-degradation, and oil creep out of the tribological regions. In the past, several techniques were developed to maintain the appropriate amount of oil in the system. They were based on oil reservoirs (cartridges, impregnated porous parts), barrier films, and labyrinth seals. Nevertheless, all these systems have had limited success or have not established a proven record for space missions. The system reported here provides to the ball-race contact fresh lubricant in-situ and on demand when the ball bearing is close to failure. The lubricant is stored in a porous cartridge attached to the inner or the outer ring of a ball bearing. The oil is released by heating the cartridge to eject oil, taking advantage of the greater thermal expansion of the oil compared to the porous network. The heating may be activated by torque increases that signal the depletion of oil in the contact. The low surface tension of the oil compared to the ball bearing material is utilized and the close proximity of the cartridge to the moving balls allows the lubricant to reach the ball-race contacts. This oil re-supply system avoided a mechanism failure, reduced torque to an acceptable level, and extended the life of the component.Keywords
This publication has 13 references indexed in Scilit:
- A 3D Conservative Model for Self-Lubricated Porous Journal Bearings in a Hydrodynamic Steady StateJournal of Tribology, 1999
- Oil Exchange between Ball Bearings and Porous Polyimide Ball Bearing RetainersTribology Transactions, 1997
- Basic Study of Lubrication by Tribo-Coating for Space Machines.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 1996
- Oil Exchange Between Ball Bearings and Cotton-Phenolic Bail-Bearing RetainersTribology Transactions, 1995
- Evaluation of the interface at boundary lubrication using the measurement of electric conductivityWear, 1994
- An experimental study on oil supply in a space bearing with an oil-impregnated retainerWear, 1993
- Solid Lubrication Processes1992
- Liquid lubrication in spaceTribology International, 1990
- Ball-Ball Load Carrying Capacity in Retainerless Angular-Contact BearingsJournal of Lubrication Technology, 1982
- The behavior of thin oil films in the presence of porous lubricant reservoirsWear, 1978