Laser gas‐assisted nitriding of steel: residual stress analysis
- 22 June 2010
- journal article
- research article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 62 (4) , 214-223
Abstract
Purpose: The laser nitriding process is involved with high temperature heating and high cooling rates. This, in turn, results in high levels of thermal stresses in the heated region. Moreover, the residual stress in the heated region remains high after the completion of the heating process, which limits the application of the laser nitriding process. The purpose of this paper is to investigate thermal stresses development and residual stress levels in the nitrided region.Design/methodology/approach: The microstructural changes and residual stress development in the laser gas‐assisted nitrided zone are examined. Finite element modeling is carried out to predict temperature and stress fields in the laser nitrided layer. The indentation tests and X‐ray diffraction (XRD) technique are used to determine the residual stress levels while previously derived analytical formula is used to predict the residual stress levels in the nitrided region.Findings: The residual stress predicted attains values within 230 MPa, which remains almost uniform in the nitrided layer, except in the surface region. In this case, residual stress reduces slightly due to the low temperature gradient developed in this region and the unconstrained expansion of the free surface. When comparing the residual stress predicted with the measurement results as obtained from the XRD technique as well as the indentation tests, all the results are in reasonably good agreement. The small discrepancies between the experimental data and predictions are attributed to the assumptions made in the model study and the measurement errors.Research limitations/implications: The depth of nitrided layer is limited 60 μm. This limits the applicability of the coating for high wearing rates.Practical implications: The nitrided surface improves the surface properties of steel, which can be used in industry more efficiently.Originality/value: The paper describes an original model study on stress formation, an experiment for surface characterization and estimation of residual stress formation and contains new findings.Keywords
This publication has 20 references indexed in Scilit:
- An initial approach to the link of multi-layer coatings contact stresses and the surface engineered gearsSurface and Coatings Technology, 2007
- Interstitial ordering of nitrogen and carbon in laser nitrided and laser carburized austenitic stainless steelJournal of Physics: Condensed Matter, 2006
- Surface Alloying of Nitrogen to Improve Corrosion Resistance of Steels and Stainless SteelsMaterials and Manufacturing Processes, 2004
- Laser–plume dynamics during excimer laser nitriding of ironJournal of Applied Physics, 2003
- Influence of laser parameters on the nitriding of low carbon steelApplied Surface Science, 2002
- Young's modulus and fracture toughness determination of high velocity oxy-fuel-sprayed bioceramic coatingsSurface and Coatings Technology, 2002
- Reactive surface processing by irradiation with excimer laser, Nd:YAG laser, free electron laser and Ti:sapphire laser in nitrogen atmosphereApplied Surface Science, 2002
- Thermal stability of laser-produced iron nitridesJournal of Applied Physics, 2001
- Laser treatment of the 38HMJ steel surface in a liquid nitrogen environment2000
- The energy dependence on microstructure of (Ti–Al–V) nitrides deposited by dual ion beam sputteringSurface and Coatings Technology, 1999