Deformation Behaviour of Martensite in a Low-Carbon Dual-Phase Steel
Authors:
- 15 February 2006
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 15-17, 774-779
Abstract
The deformation behaviour of martensite and its effect on tensile properties of a lowcarbon dual-phase (DP) steel were investigated. DP steel samples with different martensite contents and morphologies were produced after intercritical annealing at different temperatures using low and high heating rates. Two distinct martensite morphologies were obtained for low and high heating rates. The investigated steel showed the unusual results that the true fracture stress and strain were found to increase with the martensite volume fraction. The plastic deformation of martensite was considered to be responsible for these results. Experimentally, it was observed that the martensite in DP steels with greater than 25-30% martensite can deform plastically during tensile straining. Finally, the effect of tempering on the martensite plasticity was also evaluated. It was found that the tempering process and an increase in the martensite content have a similar effect on promoting martensite plasticity.Keywords
This publication has 12 references indexed in Scilit:
- Austenite formation during intercritical annealingMetallurgical and Materials Transactions A, 2004
- Influence carbon and/or iron carbide on the structure and properties of dual-phase steelsMaterials Letters, 2002
- The empirical estimation of tensile strength of dual-phase steels depending on carbon content and austenitizing temperatureMaterialwissenschaft und Werkstofftechnik, 2002
- Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steelsMetallurgical and Materials Transactions A, 1999
- Microstructure and properties of a C-Mn-Si-dual-phase steelSteel Research, 1990
- Void formation during tensile testing of dual phase steelsMetallurgical Transactions A, 1988
- Deformation characteristics of dual-phase steelsMetallurgical Transactions A, 1982
- Work hardening of dual-phase steelsMetal Science, 1981
- On the law of mixtures in dual-phase steelsMetallurgical Transactions A, 1980
- Observations on the fracture of cementite particles in a spheroidized 1.05% c steel deformed at room temperatureActa Metallurgica, 1972