The Solid Particle Erosion Behavior of Carbon/Carbon and Carbon/Phenolic Composite Used in Re-entry Vehicles
Authors:
- 30 October 2009
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 52 (6) , 777-787
Abstract
Several engineering components made of carbon-based heat-resistant composites are subjected to severe erosive wear. In view of the above, the solid particle erosion behavior of two and four dimensionally reinforced carbon/carbon (C/C) composites as well as that of carbon/phenolic (C/P) composite has been characterized at the ambient temperature. The investigated C/C composites have been produced through a liquid-phase infiltration method followed by hot isostatic pressing, while the C/P composite prepegs have been cured inside an autoclave. The erosion rates of these composites have been determined for two different impact angles and two different impact velocities using silica sand with average particle diameter of 200 μm. The morphologies of as-received and eroded surfaces of test specimens have been examined with the help of scanning electron microscopy to understand the mechanism of material removal. The erosion response, erosion efficiency, and erosion micromechanisms of these composites have been studied in detail. While the erosion resistance of the C/P composite is found to be superior to that of the investigated C/C composites, the four dimensionally reinforced C/C composite have shown the highest erosion efficiency. All the composites have exhibited a semi-ductile erosion response. Their mechanical properties have little correlation with the erosion rates.Keywords
This publication has 35 references indexed in Scilit:
- A study of the erosive wear behaviour of continuous fibre reinforced ceramic matrix compositesActa Materialia, 1997
- Effect of load on tribological behaviour of carbon-carbon compositesJournal of Materials Science, 1996
- The surface morphology and structure of carbon-carbon composites in high-energy sliding contactWear, 1994
- The solid particle erosion of polymer matrix compositesWear, 1994
- Solid-particle erosion of bismaleimide polymersWear, 1991
- An impact and erosion study of polyetheretherketoneWear, 1987
- Erosive wear of polymer surfaces by steel ball blastingJournal of Materials Science, 1986
- Erosive wear of composite materialsWear, 1986
- Solid particle erosion of reinforced composite materialsWear, 1981
- The interaction of particle and material behaviour in erosion processesWear, 1970