Material model measurements and predictions for a random pore poly(ϵ‐caprolactone) scaffold
Authors:
- 6 June 2007
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 82B (1) , 205-209
Abstract
We investigated material models for a polymeric scaffold used for bone. The material was made by co‐extruding poly(ε‐caprolactone) (PCL), a biodegradable polyester, and poly(ethylene oxide) (PEO). The water soluble PEO was removed resulting in a porous scaffold. The stress–strain curve in compression was fit with a phenomenological model in hyperbolic form. This material model will be useful for designers for quasi‐static analysis as it provides a simple form that can easily be used in finite element models. The ASTM D‐1621 standard recommends using a secant modulus based on 10% strain. The resulting modulus has a smaller scatter in its value compared with the coefficients of the hyperbolic model, and it is therefore easier to compare differences in material processing and ensure quality of the scaffold. A prediction of the small–strain elastic modulus was constructed from images of the microstructure. Each pixel of the micrographs was represented with a brick finite element and assigned the Young's modulus of bulk PCL or a value of 0 for a pore. A compressive strain was imposed on the model and the resulting stresses were calculated. The elastic constants of the scaffold were then computed with Hooke's law for a linear‐elastic isotropic material. The model was able to predict the small–strain elastic modulus measured in the experiments to within one standard deviation. Thus, by knowing the microstructure of the scaffold, its bulk properties can be predicted from the material properties of the constituents. © 2006 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2006Keywords
This publication has 13 references indexed in Scilit:
- Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sinteringBiomaterials, 2005
- Collinear optical coherence and confocal fluorescence microscopies for tissue engineeringOptics Express, 2003
- Repair of Calvarial Defects with Customised Tissue-Engineered Bone Grafts II. Evaluation of Cellular Efficiency and Efficacy in VivoTissue Engineering, 2003
- Repair of Calvarial Defects with Customized Tissue-Engineered Bone Grafts I. Evaluation of Osteogenesis in a Three-Dimensional Culture SystemTissue Engineering, 2003
- Three‐dimensional macroporous calcium phosphate bioceramics with nested chitosan sponges for load‐bearing bone implantsJournal of Biomedical Materials Research, 2002
- Mechanical and in vivo performance of hydroxyapatite implants with controlled architecturesBiomaterials, 2002
- Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modelingJournal of Biomedical Materials Research, 2001
- Finite element and finite difference programs for computing the linear electric and elastic properties of detail images of random materials1998
- Biomechanics1993
- Physico-mechanical properties of degradable polymers used in medical applications: A comparative studyBiomaterials, 1991