Statistical modeling of friction stir welding process parameters using TOPSIS and ANOVA
- 10 October 2025
- journal article
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (4) , 045519
Abstract
This study explores the multi-objective optimization of friction stir welding (FSW) process parameters to improve the mechanical characteristics such as tensile strength, microhardness, and impact strength of AA5052-H32 and AA6082-T6 dissimilar FSW joints. The experimental results were ranked and evaluated using the taguchi technique in convergence with the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) methodology. The welding speeds (WS) of 20, 25, and 30 mm min−1, the tool rotational speeds (TRS) of 1000, 1100, and 1200 RPM and the tool tilt angle (TTA) of 0°, 1°, and 2° were used as the input parameters in the trials. At a TRS of 1200 RPM and a WS of 25 mm min−1, the experimental results indicate a consistent rise in microhardness and tensile strength values with increasing TRS, reaching peak values of 72 HV and 188 MPa, respectively. Conversely, the impact strength reflected a decreasing trend, with a maximum value of 44 Joules at a TRS of 1000 RPM. This work delivers insightful information for the marine and aerospace sectors in pursuit of rigid and high-performance weld structures.Keywords
This publication has 25 references indexed in Scilit:
- Recent advances in joining technologies of aluminum alloys: a reviewDiscover Materials, 2024
- A robust Taguchi combined AHP approach for optimizing AISI 1023 low carbon steel weldments in the SAW processInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2023
- Multi-response optimization of process parameters during friction stir welding of AA2014-AA7075 using TOPSIS ApproachINCAS BULLETIN, 2023
- Friction Stir Welding Experiments on Az31b Alloy to Analyse Mechanical Properties and Optimize Process Variables by TOPSIS MethodTehnicki vjesnik - Technical Gazette, 2022
- Effect of tool rotational speed on friction stir welded AA6061-T6 scarf joint configurationAdvanced Composites and Hybrid Materials, 2022
- Influence of tool rotational speed on the evolution of microstructure and mechanical properties of precipitation-hardened Aluminium 6061 butt joint during friction stir weldingEngineering Research Express, 2022
- Designing the design of experiments (DOE) – An investigation on the influence of different factorial designs on the characterization of complex systemsEnergy and Buildings, 2021
- Effect of welding speed on mechanical properties and corrosion resistance rates of filler induced friction stir welded AA6082 and AA5052 jointsMaterials Research Express, 2021
- Optimization and characterization of dissimilar friction stir welded DP600 dual phase steel and AA6082-T6 aluminium alloy sheets using TOPSIS and grey relational analysisMaterials Research Express, 2019
- A process model for friction stir welding of age hardening aluminum alloysMetallurgical and Materials Transactions A, 2001