Strain Rate Dependence of Compressive Stress-Strain Loops of Several Polymers
Authors:
- 1 January 2008
- journal article
- Published by Japan Society of Mechanical Engineers in Journal of Solid Mechanics and Materials Engineering
- Vol. 2 (4) , 557-566
Abstract
The compressive stress-strain loops of several commercial polymers at strain rates of nearly 700/s are determined in the standard split Hopkinson pressure bar. Four different polymers or typical thermoplastics: ABS, PA-6, PA-66 and PC are tested at room temperature. Cylindrical specimens with a slenderness ratio (= height l /diameter d) of 0.5 are used in the Hopkinson bar tests, and those with l/d = 1.5 as specified in the ASTM Designation E9-89a are used in the static tests. The stress-strain loops in compression at low and intermediate strain rates are measured in an Instron testing machine. The influences of strain rate on the Young's modulus, 2.5% flow stress and dissipation energy are investigated. It is demonstrated that the area within the stress-strain loop (or dissipation energy) increases with increasing strain rate as well as given strain, that is, all polymers tested exhibit intrinsic dynamic viscoelasticity and a high elastic aftereffect following complete unloading.Keywords
This publication has 14 references indexed in Scilit:
- The high strain rate compressive behaviour of polycarbonate and polyvinylidene difluoridePolymer, 2005
- Tension and compression tests of two polymers under quasi-static and dynamic loadingPolymer Testing, 2002
- Strain rate effects on the thermomechanical behavior of polymersInternational Journal of Solids and Structures, 2001
- Drops in the Flow Stress of Semi-crystalline Polymers at Very High Rates of StrainJournal of Materials Science Letters, 1998
- The strain-rate and temperature dependence of the mechanical properties of polyetherketone and polyetheretherketoneJournal of Materials Science, 1996
- The influence of interfacial friction on the deformation of high density polyethylene in a split hopkinson pressure barWear, 1984
- Impact yielding of high density polyethylenePolymer, 1976
- Mechanical properties of various polymeric solids tested in compressionInternational Journal of Mechanical Sciences, 1971
- Difference method for wave analysis of the split hopkinson pressure bar with a viscoelastic specimenJournal of the Mechanics and Physics of Solids, 1967
- Some experiments with the split hopkinson pressure bar∗Journal of the Mechanics and Physics of Solids, 1964