Synergetic Effect of Lubricant Additive and Reinforcement Additive on the Tribological Behaviors of PEEK-Based Composites under Seawater Lubrication
Authors:
- 1 March 2013
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 56 (4) , 672-680
Abstract
Polyetheretherketone (PEEK)-based composites reinforced with lubricant additive (polytetrafluoroethylene, PTFE) and reinforcement additives including carbon fiber (CF), glass fiber (GF), and bronze powder were prepared using a hot-press molding technique. The synergetic effects of different additives on the tribological behaviors of PEEK-based composites sliding against 316 steel under seawater lubrication were investigated systematically using a ring-on-block test rig. The results showed that lubricant additive PTFE can decrease the friction coefficient and consequently improved the wear resistance of PEEK under seawater lubrication, especially when the volume fraction of PTFE was about 20%. It was also found that the incorporation of CF can further improve the wear resistance of PEEK blended with 20% PTFE, especially under high load and high sliding speed. This suggested that a synergistic effect on improving the wear resistance of PEEK existed between PTFE and CF, which originated from good lubrication of PTFE, good reinforcement of CF, and good interfacial combination between CF and PEEK-20%PTFE. However, two other reinforcement additives of GF and bronze powder had an antagonistic effect but not a synergetic effect with PTFE; that is, the incorporation of the two additives greatly deteriorated the wear resistance of PEEK blended with 20% PTFE.Keywords
This publication has 32 references indexed in Scilit:
- Tribological Behavior of Polyurethane Immersed in Acidic SolutionTribology Transactions, 2012
- Effects of solid lubricants on friction and wear behaviors of polyamide 6Journal of Applied Polymer Science, 2011
- Effects of potassium titanate whiskers and carbon fibers on the wear behavior of polyetheretherketone composite under water lubricated conditionComposites Science and Technology, 2011
- Enhancement effect of nanoparticles on the sliding wear of short fiber-reinforced polymer composites: A critical discussion of wear mechanismsTribology International, 2010
- Poly(ether ether ketone) composites reinforced by short carbon fibers and zirconium dioxide nanoparticles: Mechanical properties and sliding wear behavior with water lubricationJournal of Applied Polymer Science, 2010
- The Effect of Applied Load on Tribological Behaviors of Potassium Titanate Whiskers Reinforced PEEK Composites Under Water Lubricated ConditionTribology Letters, 2010
- Comparative Study of Tribological Properties of Different Fibers Reinforced PTFE/PEEK Composites at Elevated TemperaturesTribology Transactions, 2010
- Tribological behavior of PTFE sliding against steel in sea waterWear, 2009
- Friction and Wear Behavior of Ultra-High Molecular Weight Polyethylene Sliding Against GCr15 Steel and Electroless Ni–P Alloy Coating Under the Lubrication of SeawaterTribology Letters, 2009
- Effect of the reinforcement (carbon or glass fibres) on friction and wear behaviour of the PEEK against steel surface at long dry slidingWear, 2009