ELECTROSPARK DEPOSITION OF TI-TA COATINGS ON TI6AL4V TITANIUM ALLOY: OXIDATION RESISTANCE AND WEAR PROPERTIES
Authors:
- A.A. BurkovABA.A. Burkov
- S.V. NikolenkoSNS.V. Nikolenko
- V.O. KrutikovaVKV.O. Krutikova
- N.A. ShelmenokNSN.A. Shelmenok
- 1 January 2024
- journal article
- Published by Institute of Strength Physics and Materials Science SB RAS in Fizicheskaya Mezomekhanika
- Vol. 27 (3)
Abstract
Ti-Ta coatings were deposited on titanium alloy by electrospark deposition in an anode mixture of titanium granules and tantalum powder in an argon atmosphere. The cathode gain kinetics, tantalum concentration, structure, oxidation resistance, microhardness and tribotechnical properties of the coatings were studied. It was shown that with increasing tantalum concentration in the anode mixture, the net cathode gain during 10 min of treatment increased monotonically. The average thickness of the deposited coatings varied in the range from 30.9 to 39.1 µm. The concentration of tantalum in the coating composition increased with increasing tantalum powder concentration in the anode mixture. The coating structure was dense without longitudinal and transverse cracks. With an excess of tantalum powder in the anode mixture, the discharge energy was not enough to completely melt it. The phase composition included α-Ti and a bcc tantalum solid solution in β-Ti. With increasing powder concentration in the anode mixture, the intensity of the bcc-phase peaks increased relative to the α-Ti peaks. The surface hydrophobicity of Ti-Ta coatings was higher than that of uncoated Ti6Al4V titanium alloy. The developed technique can be used to produce Ti-Ta coatings with up to 5.9 times higher oxidation resistance compared to Ti6Al4V alloy. The high oxidation resistance of Ti-Ta coatings is explained by the formation of a dense and durable TiO2 layer. The surface microhardness of Ti-Ta coatings ranged from 4.72 to 4.91 GPa. The friction coefficient was in the range of 0.87-0.97. The wear resistance was from 23 to 36 times higher as compared to the titanium alloy.Keywords
This publication has 5 references indexed in Scilit:
- Friction and wear behaviors of Ta-based nanocrystalline composite coating under extreme sliding conditionsSurface and Coatings Technology, 2023
- Research on the surface characterization, corrosion and bioactivity of nano-featured tantalum coating on selective electron beam melted Ti6Al4V alloyJournal of Alloys and Compounds, 2023
- Compositional and Tribo‐Mechanical Characterization of Ti‐Ta Coatings Prepared by Confocal Dual Magnetron Co‐SputteringAdvanced Engineering Materials, 2017
- Surface characterization and preparation of Ta coating on Ti6Al4V alloyJournal of Alloys and Compounds, 2015
- Tantalum—A bioactive metal for implantsJOM, 2010