Mechanical properties and predictive analysis of multi‐material polypropylene‐glass fiber sandwich structures produced by material extrusion
Open Access
- 19 February 2025
- journal article
- Published by Wiley in Polymer Composites
- Vol. 46 (11) , 10239-10253
Abstract
Combining multiple filaments in material extrusion (MEX) to tailor mechanical properties is increasingly significant in science and applications. However, understanding the interaction between different materials, the influence on the mechanical properties and the predictability of such properties is still poor. Therefore, this study investigates the tensile and flexural behavior of 3D‐printed sandwich‐type composites made of polypropylene (PP) and glass fiber‐filled polypropylene (PPGF). The materials exhibit different mechanical properties, with PP being more ductile and flexible and PPGF being more brittle and stiff. Various contents of PP and PPGF were used. Measured mechanical values were correlated with theoretical predictions. The tensile properties scaled linearly with the material composition, covering a range of moduli and strength values between 500–2910 MPa and 18–43 MPa, respectively. A rule of mixture could be applied, although PPGF layers tended to crack early. The ductile nature of PP allowed for bridging cracks, preventing premature failure. In flexural tests, the shell material dominated modulus, strength and failure mode. The samples with PPGF shells failed by cracking, while specimens with PP shells showed high deformation without clear failure. By varying contents and layer order, flexural moduli ranging from 680 to 3180 MPa and flexural strengths from 25 to 65 MPa were reached. Additionally, the study demonstrated that theoretical calculations and predictions of tensile and flexural moduli were highly accurate with an average deviation of 6.0% and 1.4%, respectively. This highlights the potential for tailoring mechanical properties based on the characteristics of PP and PPGF.Highlights: High PP/PPGF interface adhesion ensures reproducible multi‐material printing. Whole range of mechanical properties from ductile PP to stiff PPGF is reached. Order and amount of both materials determine failure behavior. Analytical prediction of modulus is very accurate.Keywords
Funding Information
- Universität Bayreuth
This publication has 32 references indexed in Scilit:
- Analyzing the Influence of Multimaterial 3D Printing and Postprocessing on Mechanical and Tribological CharacteristicsMacromolecular Materials and Engineering, 2024
- Introduction and Motivation2023
- Direct Ink Writing: A 3D Printing Technology for Diverse MaterialsAdvanced Materials, 2022
- Mechanical properties of the FFF sandwich-structured parts made of PLA/TPU multi-materialProgress in Additive Manufacturing, 2022
- Advances in polymers based Multi-Material Additive-Manufacturing Techniques: State-of-art review on properties and applicationsAdditive Manufacturing, 2022
- Studying sacrificial ice structure, as soluble support layers, in 3D printing of polymers (FDM)Progress in Additive Manufacturing, 2021
- Multi‐Material 3D and 4D Printing: A SurveyAdvanced Science, 2020
- The impact on the mechanical properties of multi-material polymers fabricated with a single mixing nozzle and multi-nozzle systems via fused deposition modelingThe International Journal of Advanced Manufacturing Technology, 2020
- Multi-material 3D printing: The relevance of materials affinity on the boundary interface performanceAdditive Manufacturing, 2018
- A new rectangular beam theoryJournal of Sound and Vibration, 1981