A Novel Laser 3D Printing Method for the Advanced Manufacturing of Protonic Ceramics
Open Access
Abstract
Protonic ceramics (PCs) with high proton conductivity at intermediate temperatures (300–600 °C) have attracted many applications in energy conversion and storage devices such as PC fuel/electrolysis cells, PC membrane reactors, hydrogen pump, hydrogen or water-permeable membranes, and gas sensors. One of the essential steps for fulfilling the practical utilization of these intermediate-temperature PC energy devices is the successful development of advanced manufacturing methods for cost-effectively and rapidly fabricating them with high energy density and efficiency in a customized demand. In this work, we developed a new laser 3D printing (L3DP) technique by integrating digital microextrusion-based 3D printing and precise and rapid laser processing (sintering, drying, cutting, and polishing), which showed the capability of manufacturing PCs with desired complex geometries, crystal structures, and microstructures. The L3DP method allowed the fabrication of PC parts such as pellets, cylinders, cones, films, straight/lobed tubes with sealed endings, microchannel membranes, and half cells for assembling PC energy devices. The preliminary measurement of the L3DP electrolyte film showed a high proton conductivity of ≈7 × 10−3 S/cm. This L3DP technique not only demonstrated the potential to bring the PCs into practical use but also made it possible for the rapid direct digital manufacturing of ceramic-based devices.Keywords
Funding Information
- Hydrogen and Fuel Cell Technologies Office (DE-EE0008428)
This publication has 41 references indexed in Scilit:
- Galvanic hydrogen pumping in the protonic ceramic perovskiteJournal of Membrane Science, 2013
- Ionic conduction in BaCe0.85−xZrxEr0.15O3-α and its application to ammonia synthesis at atmospheric pressureSolid State Ionics, 2011
- Solid-state reactive sintering mechanism for large-grained yttrium-doped barium zirconate proton conducting ceramicsJournal of Materials Chemistry, 2010
- Cost-effective solid-state reactive sintering method for high conductivity proton conducting yttrium-doped barium zirconium ceramicsSolid State Ionics, 2010
- Autothermal hydrogen generation from methanol in a ceramic microchannel networkJournal of Power Sources, 2010
- Fabrication of Functionally Graded and Aligned Porosity in Thin Ceramic Substrates With the Novel Freeze–Tape‐Casting ProcessJournal of the American Ceramic Society, 2007
- Cytotoxicity of formaldehyde on human osteoblastic cells is related to intracellular glutathione levelsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2007
- Rapid manufacturing of metal components by laser formingInternational Journal of Machine Tools and Manufacture, 2006
- A Dual Electrolyte H2/O2 Planar Membraneless Microchannel Fuel Cell System with Open Circuit Potentials in Excess of 1.4 VLangmuir, 2005
- CO2 laser welding of polymersPolymer Engineering & Science, 1992