Fabrication of electrospun polyamide–weathered basalt nano-composite as a non-conventional membrane for basic and acid dye removal
Open Access
- 19 September 2022
- journal article
- research article
- Published by Springer Nature in Polymer Bulletin
- Vol. 80 (8) , 8511-8533
Abstract
In this study, an adsorptive electrospun polyamide membrane (ESPA) and electrospun polyamide–weathered basalt composite membrane (ESPA-WB) were prepared by an electrospinning process at room temperature. Hence, the WB structure was built as a polymeric membrane separation film in combination with the ESPA matrix as a composite nano-filtration membrane. Then, the ESPA and ESPA-WB membranes were characterized using BET surface area analysis, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy (SEM). To avoid cracks forming during the sintering process, the WB should be added in certain percentages. The microstructures of the prepared membranes were investigated to evaluate their efficiency for basic and acidic dyesʼ removal and their permeation flux. Compared with the ESPA, the ESPA-WB membrane combines the characteristics of WB and ESPA, which greatly enhances the performance of both methylene blue (MB) and methyl orange (MO) dyes removal from synthetic wastewater. The outcomes of this study indicated that the dye uptake in the case of ESPA-WB is higher than that of ESPA, and it decreases with an increase in dye concentrations. The obtained membrane ESPA-WB showed both an excellent anti-dye fouling and a good rejection property for both dyes (i.e. 90% rejection for MB and 74% for MO) with no sign of contamination by the applied dyes. It was found that the structure of the ESPA-WB membrane contains a large number of several adsorption sites which leads to an increase in the removal rate of dyes. Hence, this study demonstrated a non-conventional strategy to prepare an effective adsorptive nano-composite membrane that can be applied as a highly recyclable one for the removal of organic dyes. GraphicKeywords
Funding Information
- Beni Suef University
This publication has 68 references indexed in Scilit:
- Utilization of recycled post consumer carpet waste fibers as reinforcement in lightweight cementitious compositesInternational Journal of Clothing Science and Technology, 2011
- Facile Synthesis of Highly Conductive RuO2-Mn3O4 Composite Nanofibers via Electrospinning and Their Electrochemical PropertiesJournal of the Electrochemical Society, 2011
- Electrospinning: A fascinating fiber fabrication techniqueBiotechnology Advances, 2010
- Preparation of one-dimensional TiO2 nanoparticles within polymer fiber matrices by electrospinningMaterials Letters, 2007
- Thermal and mechanical properties of electrospun PMMA, PVC, Nylon 6, and Nylon 6,6Polymers for Advanced Technologies, 2007
- Effect of needle diameter on nanofiber diameter and thermal properties of electrospun poly(methyl methacrylate)Polymers for Advanced Technologies, 2007
- Relationship between Fibrous Structure and Spunbond ProcessTextile Research Journal, 2006
- Environmental Analysis of Textile ProductsClothing and Textiles Research Journal, 2006
- Electrospinning of Nanofibers: Reinventing the Wheel?Advanced Materials, 2004
- Small angle X-ray diffraction study of blends of nylon 6 and a liquid crystal copolyesterPolymer, 2000