Reduction of Zero-Sequence and Differential-Mode Circulating Currents and Common-Mode Voltage in Parallel PWM Converters
- 14 June 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (4) , 4038-4047
Abstract
This article aims to present a reduction strategy for circulating current and common-mode voltage in parallel pulsewidth modulated (PWM) converters. As the common-mode voltage reduction is possible only with the elimination of some switching vectors, it may affect the circulating current paths. Elimination of both mentioned parameters at the same time is impossible for the systems with two-level converters. Therefore, in addition to the modification of the PWM strategy, an interface circuit is introduced to reduce the circulating current as well as reducing current ripple and losses. This topological modification adds some degree of freedom and leads to a reduction of circulating currents passing through each switch, which releases its current carrying capability and reducing conduction losses especially in higher power and voltage applications. Simulation and experimental results are presented to verify the analysis of the proposed strategy.Keywords
Funding Information
- Babol Noshirvani University of Technology (BNUT/, 389051, /1401)
This publication has 25 references indexed in Scilit:
- MMC-based solid-state transformer model including semiconductor lossesElectrical Engineering, 2017
- A Novel Carrier-Based Hybrid PWM Technique for Minimization of Line Current Ripple in Two Parallel Interleaved Two-Level VSIsIEEE Transactions on Industrial Electronics, 2017
- Common-Mode Voltage Reduction for Paralleled InvertersIEEE Transactions on Power Electronics, 2017
- Suppressing Zero-Sequence Circulating Current of Modular Interleaved Three-Phase Converters Using Carrier Phase Shift PWMIEEE Transactions on Industry Applications, 2017
- Paralleled inverters with zero common-mode voltage2016
- A Three-Level Space Vector Modulation Scheme for Paralleled Converters to Reduce Circulating Current and Common-Mode VoltageIEEE Transactions on Power Electronics, 2016
- An Integrated Inductor for Parallel Interleaved VSCs and PWM Schemes for Flux MinimizationIEEE Transactions on Industrial Electronics, 2015
- Modified Discontinuous PWM for Size Reduction of the Circulating Current Filter in Parallel Interleaved ConvertersIEEE Transactions on Power Electronics, 2014
- Common-Mode Circulating Current Control of Paralleled Interleaved Three-Phase Two-Level Voltage-Source Converters With Discontinuous Space-Vector ModulationIEEE Transactions on Power Electronics, 2011
- Shunt Active-Power-Filter Topology Based on Parallel Interleaved InvertersIEEE Transactions on Industrial Electronics, 2008