Effect of flexible pin on the dynamic behaviors of wind turbine planetary gear drives
Authors:
Open Access
- 4 May 2012
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 227 (1) , 74-86
Abstract
Flexible pins eliminate the need for straddle mounting, and therefore enable the maximum possible number of planets to be used for any particular epicyclic ratio of power transmission systems. Having more planet gears will significantly increase the input torque density. In this type of design, the pin stiffness and position tolerances are important parameters as they affect the dynamic performances significantly. The present study addresses this issue by modeling, the design of double cantilevered flexible pin, and analyzing the contributions of pin stiffness and misalignment applying the lumped parameter approach. The proposed model formulates the coupled lateral-torsional dynamic response of a planetary spur gear, including the effects of mesh stiffness and phasing as a function of pin error. The resultant equations of motion are applied to examine the effects of pin stiffness and position errors on the natural modes and structural dynamic response. The effects of pin stiffness on deviation of the tooth contact forces of the sun-planet and ring-planet gear pairs are analyzed to understand the relationship between mesh characteristic and input speed variations. The calculated supporting forces of the planet gear are examined to understand the load sharing characteristic due to pin errors, pin stiffness and input load of the power transmission system.Keywords
This publication has 22 references indexed in Scilit:
- Epicyclic Load Sharing Map — Development and validationMechanism and Machine Theory, 2011
- Influence of Planet Pin Stiffness on Load Sharing in Planetary Gear DrivesJournal of Mechanical Design, 2010
- An Experimental Study of the Influence of Manufacturing Errors on the Planetary Gear Stresses and Planet Load SharingJournal of Mechanical Design, 2008
- Nonlinear dynamics of planetary gears using analytical and finite element modelsJournal of Sound and Vibration, 2007
- Application of a System Level Model to Study the Planetary Load Sharing BehaviorJournal of Mechanical Design, 2004
- SENSITIVITY OF PLANETARY GEAR NATURAL FREQUENCIES AND VIBRATION MODES TO MODEL PARAMETERSJournal of Sound and Vibration, 1999
- Analytical Characterization of the Unique Properties of Planetary Gear Free VibrationJournal of Vibration and Acoustics, 1999
- Load sharing characteristics of planetary transmissionsMechanism and Machine Theory, 1994
- Vibration transmission through rolling element bearings, part I: Bearing stiffness formulationJournal of Sound and Vibration, 1990
- Dynamic Behavior of Planetary Gear : 1st Report Load Distribution in Planetary GearBulletin of JSME, 1976