Starch consolidation casting of porous alumina and functional gradient porosity development
Open Access
- 1 January 2024
- journal article
- research article
- Published by National Library of Serbia in Processing and Application of Ceramics
- Vol. 18 (1) , 87-97
Abstract
Starch consolidation casting (SCC) technique was successfully employed to produce both porous alumina and graded porous alumina ceramics. The solid content in the alumina suspension was maintained at 40 vol.%, with potato starch varying from 5 to 15%. Structures of the porous alumina (monolithic) samples obtained by SCC and uniaxial pressing were compared. In addition, the influence of the SCC consolidation temperature and the starch content were evaluated in the monolithic samples, while the consolidation temperature and the number of layers numbers were evaluated in the graded samples. The lower SCC consolidation temperature resulted in lower linear shrinkage and a slight increase in total porosity due to the increased pore size. The compressive strength values for the monolithic samples ranged from 60 to 200MPa, which can be considered high when compared to previous works. The graded samples exhibited porosity variations across layers and interfaces were free of cracks and imperfections. Linear shrinkage was the same for the adopted consolidation temperature and the porosity was slightly higher for the 3-layer samples. They achieved strength of 60MPa with fracture mode parallel to the applied load.Keywords
This publication has 39 references indexed in Scilit:
- High-strength macro-porous alumina ceramics with regularly arranged pores produced by gel-casting and sacrificial template methodsJournal of Materials Science, 2019
- Alumina Ceramics Fabricated by in-situ Consolidation of Pre-gelling StarchJournal of Wuhan University of Technology-Mater. Sci. Ed., 2018
- Surface modification using the biomimetic method in alumina‐zirconia porous ceramics obtained by the replica methodJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2018
- Functionally graded materials: A review of fabrication and propertiesApplied Materials Today, 2016
- Thermal analysis of starch for realizing embedded channel in low temperature co-fired ceramicJournal of Thermal Analysis and Calorimetry, 2013
- Thermogelling behaviour of starches to be used in ceramic consolidation processesCeramics International, 2010
- Low‐ and High‐temperature Processes and Mechanisms in the Preparation of Porous Ceramics via Starch Consolidation CastingStarch - Stärke, 2010
- Porosity and pore space characteristics of starch-processed porous ceramicsJournal of Materials Science, 2006
- The damage mechanics of brittle solids in compressionPure and Applied Geophysics, 1990
- The failure of brittle porous solids under compressive stress statesActa Metallurgica, 1986