Optimal Efficiency Control Strategy in Wind Energy Conversion System With Induction Generator
Authors:
- 4 October 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 1 (4) , 238-246
Abstract
This paper presents an optimal efficiency control strategy for wind energy conversion systems (WECSs) with squirrel cage induction generators (SCIGs). The developed control scheme provides an optimal efficiency of the induction generator and maximum power extraction from the wind turbine. Thus, maximum power harvesting from the whole WECS is achieved and additionally expansion of the exploitable wind speed region toward the lower speed range is accomplished. A minimum electric loss (MEL) controller is introduced to minimize the generator electric loss and a maximum power point tracking (MPPT) controller is used to maximize the wind turbine output power. Common input to the two optimal controllers is only the generator speed, while the measurement of the wind speed is not required. The controllers determine the optimal d- and q-axis stator current components of the SCIG through optimal conditions and, therefore, fast dynamic response of the WECS is accomplished. An experimental procedure is proposed to determine the MEL and MPPT controller parameters. Therefore, neither the knowledge of SCIG loss model, nor the characteristic curves of the wind turbine are required. The effectiveness and the operational improvements of the suggested optimal control scheme have been verified experimentally.Keywords
This publication has 24 references indexed in Scilit:
- Maximum electrical energy production of a variable speed Wind Energy Conversion System2012
- Wind turbine simulator for laboratory testing of a wind energy conversion drive train2012
- Wind Turbine Control Systems2007
- Design of a maximum power tracking system for wind-energy-conversion applicationsIEEE Transactions on Industrial Electronics, 2006
- Maximum output power control of wind generation system considering loss minimization of machines2005
- Sensorless Output Maximization Control for Variable-Speed Wind Generation System Using IPMSGIEEE Transactions on Industry Applications, 2005
- Field-oriented controlled induction generator with loss minimizationIEEE Transactions on Industrial Electronics, 2002
- Design and performance evaluation of a fuzzy-logic-based variable-speed wind generation systemIEEE Transactions on Industry Applications, 1997
- A rule-based fuzzy logic controller for a PWM inverter in a stand alone wind energy conversion schemeIEEE Transactions on Industry Applications, 1996
- Induction Motor Efficiency Test MethodsIEEE Transactions on Industry Applications, 1981