The effect of electrical parameters of eddy current sensor on metal film thickness measurement performance and the optimization method
Authors:
- 1 October 2023
- journal article
- research article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (10)
Abstract
Eddy current sensors have been widely used in the field of micro- and nano-measurements. The detection circuit is a key part of eddy current sensors. In particular, the electrical parameters in the signal conversion circuit have an important effect on the measurement performance. It is necessary to study the effect of the electrical parameters on the measurement performance and propose an optimization method. In this study, a simulation model of the eddy current sensor is established by coupling a magnetic field and a circuit field. The circuits include the LC parallel resonance, the AC bridge, and three combination circuits of the LC resonant and AC bridge. The output voltage variation with the thickness of copper film is calculated, and the effect of the electrical parameters on sensitivity Ki is obtained. In the LC parallel resonant circuit, it’ is revealed that K1 is maximum when the parallel capacitance CP is equal to the resonant capacitance C0. An optimization method of adjusting resistance RS in different thickness intervals is proposed. In the AC bridge circuit, it’ is revealed that there exists an optimal RS, which makes K2 maximum. In three combination circuits, K3, K4, and K5 are the maximum when the capacitances (C1, C2, and C3) reach the resonant capacitance C0. In addition, the sensitivity of each combination circuit is improved compared with that of the AC bridge. The relevant analysis results are further verified by a series of experiments. According to the calculation results and the experimental analysis, the optimization method for electrical parameters is further proposed.Keywords
Funding Information
- National Natural Science Foundation of China (52105172)
- Beijing Nova Program (20220484048)
This publication has 19 references indexed in Scilit:
- Simulation of corrosion detection inside wellbore by X-ray backscatter radiographyApplied Radiation and Isotopes, 2019
- Enhancing adhesion performance of sputtering Ti/Cu film on pretreated composite prepreg for stacking structure of IC substratesComposites Part B: Engineering, 2019
- Four-Probe Bridges for In-Line Determination of Thickness and Sidewall Etch Angle of Surface Micromachined Thin FilmsApplied Sciences, 2018
- A Thickness Measurement System for Metal Films Based on Eddy-Current Method With Phase DetectionIEEE Transactions on Industrial Electronics, 2017
- Development of a Simple Manufacturing Process for All-Inkjet Printed Organic Thin Film Transistors and CircuitsIEEE Journal on Emerging and Selected Topics in Circuits and Systems, 2016
- Noninvasive thickness measurements of metal films through microwave dielectric resonatorsElectronic Materials Letters, 2016
- Improvement of sensitivity of eddy current sensors for nano-scale thickness measurement of Cu filmsNDT & E International, 2014
- Resonant enhancement of a passive coil-capacitance loop in eddy current sensing pathMeasurement, 2012
- Measurement of Oil Film Thickness Between W-N Helical Gear Tooth Profiles Using Laser Transmission MethodJournal of Tribology, 1990
- Wheatstone Bridge SensitivityIEEE Transactions on Instrumentation and Measurement, 1969