Aging of polyamide 12 in oil at different temperatures and pressures
- 15 May 2017
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 28 (12) , 1778-1786
Abstract
Polyamide 12 (PA 12) is an alternative to steel in the manufacture of pipes for transporting oil and gas. However, polyamide pipes suffer degradation, triggered by factors such as temperature and exposure to chemicals. In this research, the authors studied the variation of mechanical and thermal properties and of structural characteristics of a PA 12 grade after aging in oil. The aging process lasted 3360 h. It was made at ambient temperature and at 70 °C, under pressures of 1 and 17 atm. At ambient temperature and atmospheric pressure, PA 12 increased in volume, weight and rigidity, and decreased in damping. At 70 °C and atmospheric pressure, there was a smaller increase in volume and weight. PA 12 samples also darkened, showed an increase in crystallinity and damping, and a decrease in rigidity. At 70 °C and 17 atm, a decrease in volume and weight was observed; the samples also darkened, increased in crystallinity and rigidity, and decreased in damping. In all aging conditions, the results of the thermal analysis and the analysis of functional groups showed that the chemical structure of the material was not significantly changed. According to the results, PA 12 has a good resistance to aging under these conditions. Copyright © 2017 John Wiley & Sons, Ltd.Keywords
This publication has 17 references indexed in Scilit:
- A practical method for the estimation of oil and water mutual solubilitiesFluid Phase Equilibria, 2013
- Effect of POSS on crystalline transitions and physical properties of polyamide 12Journal of Polymer Science Part B: Polymer Physics, 2008
- Ageing properties of polyamide-12 pipes exposed to fuels with and without ethanolPolymer Degradation and Stability, 2008
- Crystalline structure of polyamide 12 as revealed by solid‐state 13C NMR and synchrotron WAXS and SAXSJournal of Polymer Science Part B: Polymer Physics, 2005
- Crystalline Structure and Morphology in Nylon-12: A Small- and Wide-Angle X-ray Scattering StudyMacromolecules, 2003
- Crystal structure and morphology of biaxially oriented polyamide 12 filmsJournal of Polymer Science Part B: Polymer Physics, 2002
- Dynamic and static moduli of elasticity of resin-based materialsDental Materials, 2002
- Investigation of structure development in polyamide 11 and polyamide 12 tubular film extrusionPolymer Engineering & Science, 2002
- The Impact of Composite Structure on Its Elastic ResponseJournal of Dental Research, 1986
- The effect of hydrostatic pressure on the visco-elastic properties of polymersPolymer, 1971