Processing and properties of thermoplastic starch and its blends with sodium alginate
- 27 April 2001
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 81 (2) , 412-420
Abstract
Viscosity measurements were carried out on corn starch (CS) and CS–sodium alginate (SA) suspensions at low levels of SA [1 to 10% (w/w)], as a function of temperature. The addition of SA caused the granular CS gelatinization process to occur at a lower onset temperature. CS and CS–SA mixtures were extruded in single‐ and twin‐screw extruders, with 15% glycerol and different water contents. Processing of plasticized CS–SA mixtures required lower temperatures, which is consistent with the viscosity results. Homogeneous and flexible extrudates were obtained by processing in a twin‐screw extruder. Samples in the composition range between 0 and 10% (w/w) SA were examined using tensile tests as a function of water content. Mechanical properties were dependent on the water content and on the SA composition. A significant increase in the Young's modulus value was observed for the blend containing 1% SA. Dynamic mechanical analysis was carried out for CS and CS–SA blends. Two transitions were detected in the temperature range –80 to 150°C. Scanning electron microscopy was used to examine the morphology of the extruded samples. The surfaces of the films were homogeneous, which demonstrated that the CS granules in all samples were characteristically destructured under the conditions used in processing. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 412–420, 2001Keywords
This publication has 18 references indexed in Scilit:
- Structure-property relationship in PCL/starch blend compatibilized with starch-g-PCL copolymerJournal of Polymer Science Part B: Polymer Physics, 1999
- Biodegradable materials — Present situation and future perspectivesMacromolecular Symposia, 1998
- Innovative biodegradable materials based upon starch and thermoplastic poly(ester-urethane) (TPU)Polymer Degradation and Stability, 1998
- Biodegradable films made from low density polyethylene (LDPE), wheat starch and soluble starch for food packaging applications. Part 2Carbohydrate Polymers, 1997
- Synthesis, Characterization and Properties of Polyacrylamide‐Starch CompositesStarch - Stärke, 1996
- Structural characteristics of biodegradable thermoplastic starch/poly(ethylene–vinyl alcohol) blendsJournal of Applied Polymer Science, 1995
- Biodegradable plastics: A reviewAdvances in Polymer Technology, 1990
- Recent developments in our understanding of amylopectin structureCarbohydrate Polymers, 1989
- Starch Crystal Transformations and Their Industrial ImportanceStarch - Stärke, 1988
- Amidons Lintnérisés Etudes chromatographique et enzymatique des résidus insolubles provenant de l'hydrolyse chlorhydrique d'amidons de céréales, en particulier de maïs cireuxStarch - Stärke, 1975