AFM nanoindentation of pulp fibers and thin cellulose films at varying relative humidity
Authors:
- Christian GanserCGChristian Ganser
- Ulrich HirnUHUlrich Hirn
- Sebastian RohmSRSebastian Rohm
- Robert SchennachRSRobert Schennach
- Christian TeichertCTChristian Teichert
- 8 May 2013
- journal article
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 68 (1) , 53-60
Abstract
In papermaking, the formation of bonds between single pulp fibers is influenced by the hardness of the fibers in their wet state. In this work, transversal hardness and modulus of pulp fibers have been studied via atomic force microscopy-based nanoindentation in dependence on relative humidity (RH). Additionally, the change in hardness of cellulose and xylan/cellulose model films was also investigated as a function of swelling in the presence of water and calcium chloride (CaCl2) solution. The hardness of pulp fibers is decreasing slowly from 240 MPa at 5% RH to 90 MPa at 80% RH and exhibits a distinct decrease to 2.7 MPa at the fully wet state. The hardness in water is reduced by a factor of almost 100 compared with the dry state; therefore, a form change is easily possible and facilitates the formation of hydrogen bonds on the fiber surfaces. The investigations on the model films reveal that pure cellulose hardens in the CaCl2 solution, compared with distilled water, whereas xylan on cellulose is becoming softer.Keywords
This publication has 13 references indexed in Scilit:
- Analysis of precipitated lignin on kraft pulp fibers using atomic force microscopyCellulose, 2012
- Influence of the adhesive formulation on the mechanical properties and bonding performance of polyurethane prepolymersHolzforschung, 2011
- Thickness Dependence of Reflection−Absorption Infrared Spectra of Supported Thin Polymer FilmsMacromolecules, 2011
- Cellulose—model films and the fundamental approachChemical Society Reviews, 2006
- Nanoindentation of regenerated cellulose fibresCellulose, 2005
- Novel method for preparing cellulose model surfaces by spin coatingPolymer, 2003
- Accurate measurement of tip–sample contact size during nanoindentation of viscoelastic materialsJournal of Materials Research, 2003
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Atomic Force MicroscopePhysical Review Letters, 1986
- Effect of pH and neutral salts upon the swelling of cellulose gelsJournal of Applied Polymer Science, 1980