Removal of Cu(II) and Ni(II) by ion exchange resin in packed rotating cylinder
Authors:
Open Access
- 1 June 2015
- journal article
- research article
- Published by Elsevier in Desalination and Water Treatment
- Vol. 55 (1) , 199-209
Abstract
The removal of copper and nickel ions from aqueous solutions was evaluated using an ion-exchange resin, purolite C100-MB packed in a perforated rotating basket reactor. The cation-exchange performance of the resin was determined by batch equilibrium method. The present reactor can replace batch agitated vessel where the resin was fluidized by rotating impeller. The effect of rotational basket speed, pH, contact time, temperature, and coexisting metal ions were demonstrated. The reusability of the resin was also studied to estimate the effectiveness of the purolite C100-MB resin. Equilibrium experimental data were successfully described by Langmuir isotherm models. An empirical design procedure based on sorption equilibrium conditions was used for predicting the size of ion exchange reactor. Experimental data were analyzed according to the surface reaction and intraparticle models. Kinetic experiments demonstrated that experimental data for purolite C100-MB resin obey pseudo-second-order models with rates limited by particle diffusion. Various thermodynamic parameters have been calculated. The sorption process of copper and nickel ions onto purolite C100-MB resin was found to be spontaneous and exothermic process.Keywords
This publication has 27 references indexed in Scilit:
- Removal of toxic chromium from aqueous solution, wastewater and saline water by marine red alga Pterocladia capillacea and its activated carbonArabian Journal of Chemistry, 2015
- Poly(N-isopropylacrylamide-co-acrylic acid) hydrogels for copper ion adsorption: Equilibrium isotherms, kinetic and thermodynamic studiesJournal of Environmental Chemical Engineering, 2013
- Effect of large pore size of multifunctional mesoporous microsphere on removal of heavy metal ionsJournal of Hazardous Materials, 2013
- A multi-pH-dependent, single optical mesosensor/captor design for toxic metalsChemical Communications, 2012
- Adsorption of Pb(II) ions from aqueous solution by native and activated bentonite: Kinetic, equilibrium and thermodynamic studyJournal of Hazardous Materials, 2010
- Kinetic evaluation of phenol/aniline mixtures adsorption from aqueous solutions onto activated carbon and hypercrosslinked polymeric resin (MN200)Reactive and Functional Polymers, 2010
- Defluoridation chemistry of synthetic hydroxyapatite at nano scale: Equilibrium and kinetic studiesJournal of Hazardous Materials, 2008
- Equilibrium and kinetics of heavy metal ion exchangeJournal of the Chinese Institute of Chemical Engineers, 2007
- Review of second-order models for adsorption systemsJournal of Hazardous Materials, 2006
- Adsorption of heavy metals on Na-montmorillonite. Effect of pH and organic substancesWater Research, 2003