Subsurface Mapping and Geotechnical Design for Landslide Mitigation
Open Access
- 1 September 2025
- journal article
- Published by Ital Publication in Civil Engineering Journal
- Vol. 11 (9) , 3811-3825
Abstract
The landslide near the PT Molindo Incinerator Unit poses a significant threat to the facility’s structural integrity. Without immediate mitigation measures, the incinerator building is at risk of collapse, potentially impacting adjacent settlements due to cascading structural failures. To reduce the risk of further instability, urgent geophysical investigation is required to characterize the subsurface lithology and assess the groundwater table conditions. A geoelectrical resistivity survey was conducted using the Schlumberger configuration across 8 measurement points along a 100-meter survey line, with 10-meter electrode spacing. The resistivity measurements ranged from 3.30 to 25 Ωm, which were interpreted as clay-rich layers; 26 to 167 Ωm, corresponding to sandy clay; and 167 to 15,944 Ωm, indicating bedrock. The potential slip zone is interpreted at an average depth of 20 to 25 meters, indicated by very low resistivity values with resistivity values between 3.30 and 25 Ωm. Field observations confirmed that the landslide materials predominantly consisted of clay soils, distributed within two distinct layers beneath the incinerator unit. The combined depth of the clay and overlying sandy layers was estimated to reach approximately 20-25 meters from the ground surface. To ensure the effectiveness of structural mitigation, a retaining wall must be designed to extend beyond this depth threshold. Numerical simulations using Slope/W software indicated that soil nailing techniques yielded safety factors ranging from 1.32 to 1.81 under static conditions and 1.22 to 1.43 under dynamic conditions. Predicted deformations ranged from 0.01 to 0.02 meters (static) and 0.02 to 0.03 meters (dynamic). These results suggest that soil nailing is a viable reinforcement method to stabilize slope movements, particularly during periods of high rainfall. Additional recommended mitigation strategies include the installation of surface and subsurface drainage systems to control water flow, constructing retaining structures to serve as physical barriers to soil movement, and using vegetative cover to enhance slope stability.Keywords
This publication has 40 references indexed in Scilit:
- Geotechnical and geophysical property models of soil-covered slopes prone to landsliding. The case study of the Ischia Island (southern Italy)CATENA, 2024
- An ecological indicator system for shallow landslide analysisCATENA, 2022
- Rapid characterisation of landslide heterogeneity using unsupervised classification of electrical resistivity and seismic refraction surveysEngineering Geology, 2021
- Numerical Studies on the Behavior of Slope Reinforced with Soil Nails2021
- Characteristics and causes of the landslide on July 23, 2019 in Shuicheng, Guizhou Province, ChinaLandslides, 2020
- Application of the modified Q-slope classification system for sedimentary rock slope stability assessment in IranEngineering Geology, 2020
- Landslide Risk Management in Hong Kong - Experience in the Past and Planning for the FutureLandslides, 2019
- Soil Nailing for Failed Slope Stabilization on Hilly Terrain2019
- Four‐dimensional imaging of moisture dynamics during landslide reactivationJournal of Geophysical Research: Earth Surface, 2016
- Probabilistic back analysis of rainfall induced landslide‐ A case study of Malin landslide, IndiaEngineering Geology, 2016