Assessment of Hole Quality, Thermal Analysis, and Chip Formation during Dry Drilling Process of Gray Cast Iron ASTM A48
Open Access
Abstract
The cutting parameters in drilling operations are important for high-quality holes and productivity improvement in any manufacturing industry. This study investigates the effects of spindle speed and feed rate on temperature, surface roughness, hole size, circularity, and chip formation during dry drilling of gray cast iron ASTM A48. The results showed that the temperature increased as spindle speed and feed rate increased. The surface roughness had an inverse relationship with the spindle speed and direct relation with the feed rate. Furthermore, hole size increased with increased spindle speed and decreased as the feed rate increased, while hole circularity decreased with increasing both the spindle speed and feed rate. The analysis of variance (ANOVA) indicated that the spindle speed had the highest percentage contribution of 56.24% on temperature, followed by the feed rate with 42.35%. The surface roughness was highly influenced by the feed rate and the spindle speed with 55% and 44.12%, respectively. While the hole size was highly influenced by the feed rate with a 74.18% percentage contribution, and the contribution of spindle speed was 21.36%. In addition, the feed rate has a percentage contribution of 70.82% on circularity, which is higher than the spindle speed of 24.26% percentage contribution. The results also showed that thick and discontinuous chips were generated at higher feed rates, while long continuous chips were produced at high spindle speeds.Keywords
This publication has 29 references indexed in Scilit:
- Machinability study of first generation duplex (2205), second generation duplex (2507) and austenite stainless steel during drilling processWear, 2013
- Effect of turning parameters on surface roughness of A356/5% SiC composite produced by electromagnetic stir castingJournal of Mechanical Science and Technology, 2012
- Cutting forces in turning of gray cast iron using silicon nitride based cutting toolMaterials & Design (1980-2015), 2009
- A new multi-view approach to characterize 3D chip morphology and properties in end milling titanium Ti–6Al–4VInternational Journal of Machine Tools and Manufacture, 2008
- Evaluation of drilled hole quality in Al 2024 alloyThe International Journal of Advanced Manufacturing Technology, 2007
- Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloyInternational Journal of Machine Tools and Manufacture, 2005
- Experimental analysis and optimisation of tool wear in dry machining of aluminium alloysWear, 2003
- Wear map for grey cast ironWear, 2003
- Cutting forces and surface finish when machining medium hardness steel using CBN toolsInternational Journal of Machine Tools and Manufacture, 2000
- Recent developments in cutting tool materialsJournal of Materials Processing Technology, 1996