Influence of Villari Effect on the magnetizing current of Induction Machines by shrink fitting of rotor cores
Authors:
- 1 June 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1316-1323
Abstract
In this paper the influence of the Villari effect, also known as the magnetoelastic effect due to the shrink fitting of rotor cores, on the magnetizing current of electrical machines is investigated. Typically the assembly between the shaft and the rotor lamination stack is done by an interference fit. The resulting mechanical tensions in the rotor lamination range up to the elastic limits. The mechanical tensions influence the magnetizing behavior of the laminations. A method is presented which includes these effects in numerical and analytical calculations of the magnetizing current based on measurements of the magnetic properties of the used material. The measurements are done with ring samples and an Epstein frame, for both DC and AC excitations. The influence of compressive and tensile stress is measured by a Single Sheet Tester (SST) providing the option to set a compressive and tensile stress. The mechanical tensions in the rotor laminations caused by the interference fit are analytically and numerically calculated in order to apply the results of the measurements with the SST on the electromagnetic calculation model. The mechanical tensions cause an increase of the magnetizing current. A recommendation is published concerning the mechanical dimensioning of the shrink fitting relating to the influence on the magnetizing current of the machine.Keywords
This publication has 8 references indexed in Scilit:
- Impact of mechanical stresses on the magnetic performance of non-oriented electrical steels and its relation to electric machine efficiency2015
- Magnetic flux distribution between rotor and shaft in two-pole induction machines with axial cooling vents2015
- Loss Analysis of Induction Motors by Considering Shrink Fitting of Stator HousingsIEEE Transactions on Magnetics, 2015
- Optimization of analytical iron loss approaches for electrical machines2013
- Characteristics analysis of induction motors by considering stress caused by shrink fitting of stator cores2013
- Effect of stress on iron loss of motor core2011
- Estimation of Iron Loss in Motor Core With Shrink Fitting Using FEM AnalysisIEEE Transactions on Magnetics, 2009
- Motor Core Iron Loss Analysis Evaluating Shrink Fitting and Stamping by Finite-Element MethodIEEE Transactions on Magnetics, 2007