Improvement of Heat Dissipation Characteristics of Cu Bus-Bar in the Switchboards through Shape Modification and Surface Treatment
Open Access
Abstract
In order to improve energy efficiency by increasing heat dissipation performance of bus-bar which distributes the current in high-power switchboard, the heat dissipation effects of the shape modification and surface treatment of Cu bus-bar were studied. The surface temperatures of the conventional plate-type bus-bar, and the improved tunnel-type bus-bar were compared by using electromagnetic and thermal analyses. The optimum thickness of tunnel-type bus-bar and the spacing and array among three bus-bars were calculated; and the surface temperature of tunnel-type bus-bar showed 7.9 °C lower than that of plate-type bus-bar in a 3-phase array condition. In addition, the surface and internal temperatures of the uncoated, CNT (Carbon nanotube)-coated, and BN (Boron nitride)-coated Cu bus-bars were measured with thermal imaging camera and the experiment using a hot plate. It was confirmed that the difference in the internal temperature between uncoated and BN-coated Cu was 19.4 °C. The application of the bus-bar improved from this study might contribute to the increase in power energy efficiency.Keywords
Funding Information
- Korea Institute of Energy Technology Evaluation and Planning (20162020107440)
This publication has 17 references indexed in Scilit:
- Study on the Optimization of the Fan Position for Cooling of the Busbar of the Enclosed SwitchboardTransactions of the Korean Society of Mechanical Engineers - B, 2018
- Partial Stray Inductance Modeling and Measuring of Asymmetrical Parallel Branches on the Bus-Bar of Electric VehiclesEnergies, 2017
- Maintenance Tools applied to Electric Generators to Improve Energy Efficiency and Power Quality of Thermoelectric Power PlantsEnergies, 2017
- Bus Bar Design for High-Power InvertersIEEE Transactions on Power Electronics, 2017
- A Design and Implementation of Busbar Joint and Temperature Measurement SystemThe Journal of the Korean Institute of Information and Communication Engineering, 2017
- Toward Online Bus-Bar Splitting for Increasing Load Margins to Static Stability LimitIEEE Transactions on Power Systems, 2016
- Experimental Validation of a Single DC Bus Cascaded H-Bridge Multilevel Inverter for Multistring Photovoltaic SystemsIEEE Transactions on Industrial Electronics, 2016
- Busbar Design of High Power HVDC ConverterThe Transactions of The Korean Institute of Electrical Engineers, 2012
- Low stray inductance bus bar design and construction for good EMC performance in power electronic circuitsIEEE Transactions on Power Electronics, 2002
- Arrangement of phases and heating constraints in a busbarIEEE Transactions on Magnetics, 1999