Superionic Conductor Enabled Composite Lithium with High Ionic Conductivity and Interfacial Wettability for Solid‐State Lithium Batteries
Authors:
- 12 December 2023
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (12)
Abstract
The urgent demand for high energy and safety batteries has generated the rapid development of Li6.4La3Zr1.4Ta0.6O12 (LLZTO) type solid‐state lithium metal batteries. However, severe dendritic lithium growth, which is caused by poor interfacial contact of the Li/LLZTO interface and loss of electrical contact during cycles due to low intrinsic Li+ diffusion coefficient of lithium, greatly hampers its practical application. Here, from the point of view of reducing surface tension and improving ion diffusion of lithium, a composite lithium anode (CLA) with high wettability and ion diffusion coefficient is prepared by adding GaP into molten lithium, thus strengthening the CLA/LLZTO interface even in cycling. As envisioned, compared to pure lithium, CLA presents lower surface tension, larger adhesion work, and higher ion diffusion coefficient, ensuring close contact of the CLA/LLZTO interface. Therefore, the assembled symmetric cells exhibit a low area specific resistance of 4.5 Ω cm2, a large critical current density of 2.5 mA cm−2, and ultra‐long lifespan of 5700 h at 0.3 mA cm−2 at 25 °C. Meanwhile, full cells coupled with LiFePO4 cathode show a high‐capacity retention of 97.32% after 490 cycles at 1C. This work provides a new solution to the interfacial challenges of solid‐state lithium‐metal batteries.Keywords
Funding Information
- National Natural Science Foundation of China (12075224, 22179014)
- Venture and Innovation Support Program for Chongqing Overseas Returnees (cx2022002)
This publication has 75 references indexed in Scilit:
- Tuning wettability of molten lithium via a chemical strategy for lithium metal anodesNature Communications, 2019
- Diffusion Limitation of Lithium Metal and Li–Mg Alloy Anodes on LLZO Type Solid Electrolytes as a Function of Temperature and PressureAdvanced Energy Materials, 2019
- An in Situ-Formed Mosaic Li7Sn3/LiF Interface Layer for High-Rate and Long-Life Garnet-Based Lithium Metal BatteriesACS Applied Materials & Interfaces, 2019
- Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cellsNature Materials, 2019
- Toward a Fundamental Understanding of the Lithium Metal Anode in Solid-State Batteries—An Electrochemo-Mechanical Study on the Garnet-Type Solid Electrolyte Li6.25Al0.25La3Zr2O12ACS Applied Materials & Interfaces, 2019
- Surface Chemistry Mechanism of Ultra-Low Interfacial Resistance in the Solid-State Electrolyte Li7La3Zr2O12Chemistry of Materials, 2017
- Structural and Electrochemical Consequences of Al and Ga Cosubstitution in Li7La3Zr2O12 Solid ElectrolytesChemistry of Materials, 2016
- Synthesis and high Li-ion conductivity of Ga-stabilized cubic Li7La3Zr2O12Materials Chemistry and Physics, 2012
- Effect of substitution (Ta, Al, Ga) on the conductivity of Li7La3Zr2O12Journal of Power Sources, 2012
- Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12Angewandte Chemie International Edition, 2007