Droplet spreading nanoimprinting method for micro-/nano-fabrication
Authors:
- 28 May 2020
- journal article
- research article
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 30 (8) , 085003
Abstract
This paper proposes an innovative nanoimprinting method that features imprinting a single droplet of resist and spreading it from center to edge to fully cover a full wafer substrate. Important advantages of this type of nanoimprinting include avoiding air bubble trapping, forming conformal mold/substrate contact, minimizing residual layer thickness, and saving the amount of resist being used. It also makes the demolding process much easier and more successful. To realize this nanoimprinting method, an imprinting tool is designed, constructed, and experimentally tested, and three key components are developed. First of all, a soft mold is integrated into a dovetailed metal ring so that it can be fixed at its edge and deformed by external force. Secondly, two independent loading mechanism are installed so that a soft mold can be initially deformed to form a point contact with a substrate and then followed by imprinting process. Finally, an elastomer cushion pad with a pre-designed convex surface profile is used to convert the loading force into a specific distributed contact pressure which can drive the resist flow. Nanoimprinting experiments have been carried out for pattering micro-scaled and nano-scaled structures on 4″ glass wafers. Excellent imprinting results are observed. The potentials and future perspectives of the proposed nanoimprint system will be addressed.Keywords
This publication has 33 references indexed in Scilit:
- Comparison of quartz and silicon as a master mold substrate for patterned media UV-NIL replica processMicroelectronic Engineering, 2011
- UV enhanced substrate conformal imprint lithography (UV-SCIL) technique for photonic crystals patterning in LED manufacturingMicroelectronic Engineering, 2010
- Numerical study on bubble trapping in UV-nanoimprint lithographyMicroelectronic Engineering, 2008
- Resist Flow Behavior in Ultraviolet Nanoimprint Lithography as a Function of Contact Angle with Stamp and SubstrateJapanese Journal of Applied Physics, 2008
- High‐Throughput and Etch‐Selective Nanoimprinting and Stamping Based on Fast‐ Thermal‐Curing Poly(dimethylsiloxane)sAdvanced Materials, 2007
- Siloxane Copolymers for Nanoimprint LithographyAdvanced Functional Materials, 2006
- Stamp design effect on 100 nm feature size for 8 inch NanoImprint lithographyNanotechnology, 2006
- Viscous flow simulation in nanoimprint using coarse-grain methodMicroelectronic Engineering, 2006
- Stamps for Submicrometer Soft Lithography Fabricated by Capillary Force LithographyAdvanced Materials, 2004
- Nanoimprint lithographyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996