Constructing Tannic Acid‐Iron Ion Metal Skeleton Layer on Polyester Fibers for Strengthening Rubber Composites Interface
Authors:
- 29 July 2025
- journal article
- Published by Wiley in Polymer Composites
- Vol. 47 (2) , 1235-1246
Abstract
In the paper, by complexing tannic acid (TA)‐iron ions (Fe 3+ ) to form a metal network skeleton structure and introducing glycerol triglycidyl ether (GTE) into the above metal network skeleton to modify the polyethylene terephthalate (PET) fibers, the bonding strength between fibers and rubber is enhanced further. Accordingly, the peeling performance between fibers and rubber is improved largely because of active groups (such as phenolic hydroxyl and epoxy groups). The surface morphologies, compositions, structures, thermal stability, and mechanical properties of the modified PET fibers were analyzed by SEM, FTIR, AFM, and TG. The results show that the optimal treatment process is the molar ratio 1:3 of TA to Fe 3+ , the solution pH 8.62, the fiber soaking treatment time 6 h, and 0.52 g/mL of GTE. Thus, a continuous TA‐Fe 3+ metal network skeleton structure layer is formed on the fiber surface, and the treatment did not damage the strength and thermal stability of the PET fibers. Last, the peel strength is increased 48% with introducing GTE compared with PET‐RFL/rubber composites. This treatment is simple to operate and has a low cost, which is expected to be applied in the future.Keywords
Funding Information
- Shanxi Scholarship Council of China (2023‐047)
This publication has 32 references indexed in Scilit:
- Interface construction and properties of polyester fibers reinforced acrylonitrile-butadiene rubber coordination compositesPolymer Bulletin, 2023
- Improving adhesion between polyester cord and rubber by using glycidyl‐POSSJournal of Applied Polymer Science, 2020
- Functionalization of wood fibers based on immobilization of tannic acid and in situ complexation of Fe (II) ionsApplied Surface Science, 2020
- Supramolecular design and applications of polyphenol-based architecture: A reviewAdvances in Colloid and Interface Science, 2019
- Mussel byssus-inspired engineering of synergistic nanointerfacial interactions as sacrificial bonds into carbon nanotube-reinforced soy protein/nanofibrillated cellulose nanocomposites: Versatile mechanical enhancementApplied Surface Science, 2018
- Influence of pH in the synthesis of ferric tannate pigment for application in antifouling coatingsJournal of Coatings Technology and Research, 2017
- Improvement of interfacial interactions using natural polyphenol-inspired tannic acid-coated nanoclay enhancement of soy protein isolate biofilmsApplied Surface Science, 2017
- Tannin-based biosorbents for environmental applications – A reviewChemical Engineering Journal, 2016
- Ultrasonic treatment of aramid fiber surface and its effect on the interface of aramid/epoxy compositesApplied Surface Science, 2008
- Super‐Hydrophobic Surfaces: From Natural to ArtificialAdvanced Materials, 2002