Breakup Processes and Droplet Characteristics of Liquid Jets Injected into Low-Speed Air Crossflow
Open Access
Abstract
The breakup processes and droplet characteristics of a liquid jet injected into a low-speed air crossflow in the finite space were experimentally investigated. The liquid jet breakup processes were recorded by high-speed photography, and phase-Doppler anemometry (PDA) was employed to measure the droplet sizes and droplet velocities. Through the instantaneous image observation, the liquid jet breakup mode could be divided into bump breakup, arcade breakup and bag breakup modes, and the experimental regime map of primary breakup processes was summarized. The transition boundaries between different breakup modes were found. The gas Weber number (Weg) could be considered as the most sensitive dimensionless parameter for the breakup mode. There was a Weg transition point, and droplet size distribution was able to change from the oblique-I-type to the C-type with an increase in Weg. The liquid jet Weber number (Wej) had little effect on droplet size distribution, and droplet size was in the range of 50–150 μm. If Weg > 7.55, the atomization efficiency would be very considerable. Droplet velocity increased significantly with an increase in Weg of the air crossflow, but the change in droplet velocity was not obvious with the increase in Wej. Weg had a decisive effect on the droplet velocity distribution in the outlet section of test tube.Keywords
Funding Information
- National Natural Science Foundation of China (No. 21808015)
This publication has 29 references indexed in Scilit:
- Numerical simulation of gas jet in liquid crossflow with high mean jet to crossflow velocity ratioChemical Engineering Science, 2017
- Intensification of volatile organic compound absorption in a compact wet scrubber at co-current flowChemosphere, 2017
- INJECTION OF WATER-IN-OIL EMULSION JETS INTO A SUBSONIC CROSSFLOW: AN EXPERIMENTAL STUDYAtomization and Sprays, 2014
- Dust removal and desulphurization in a novel venturi scrubberChemical Engineering and Processing - Process Intensification, 2012
- Primary Breakup of Turbulent Round Liquid Jets in Uniform CrossflowsAIAA Journal, 2007
- ROLE OF VISCOSITY ON TRAJECTORY OF LIQUID JETS IN A CROSS-AIRFLOWAtomization and Sprays, 2007
- Experimental study on mass transfer of a co-current gas–liquid contactor performing under high gas velocitiesChemical Engineering and Processing - Process Intensification, 2004
- PRIMARY BREAKUP OF NONTURBULENT ROUND LIQUID JETS IN GAS CROSSFLOWSAtomization and Sprays, 1999
- Investigation of a Liquid Jet in a Subsonic Cross-FlowInternational Journal of Fluid Mechanics Research, 1997
- Breakup Processes of Liquid Jets in Subsonic CrossflowsJournal of Propulsion and Power, 1997