Shape optimization of a bidirectional impulse turbine via surrogate models
Open Access
- 9 June 2017
- journal article
- research article
- Published by Taylor & Francis in Engineering Applications of Computational Fluid Mechanics
- Vol. 12 (1) , 1-12
Abstract
In this work, a bidirectional impulse turbine used in a wave energy device is simulated using a CFD technique and a shape optimization performed with multiple surrogates-assisted multi-objective evolutionary algorithm. The surrogates have been generated using the validated CFD technique. The objectives for the optimization are to maximize the shaft power and to minimize the pressure drop across the turbine. The hub and the tip thickness of the rotor blade profiles are modified and considered as the design variables. The Latin hypercube sampling technique generated design points are evaluated in the CFD solver, the objective responses are used to construct multiple surrogates, and a Pareto optimal front is generated through a multi-objective optimization approach. The turbine efficiency, which is the function of pressure drop and shaft power, is relatively increased by 10.4%. Abbreviations: BPS: best PRESS; GV: Guide vane; KRG: kriging; LE: leading edge; MOO: multi-objective optimization; OWC: oscillating water column; PRESS: predicted error sum of squares; PS: pressure side or pressure surface; RB: rotor blade; RBNN: radial basis neural network; Ref: reference; RMS: root mean square; RSA: response surface approximation; SS: suction side or suction surface; TE: trailing edge; WAS: weighted average surrogatesKeywords
Funding Information
- Korean Federation of Science and Technology Societies
This publication has 19 references indexed in Scilit:
- Numerical study on a modified impulse turbine for OWC wave energy conversionOcean Engineering, 2016
- Multiple surrogate based optimization of a bidirectional impulse turbine for wave energy conversionRenewable Energy, 2015
- Effects of Solidity Ratio on Performance of OWC Impulse TurbineAdvances in Mechanical Engineering, 2014
- Multi-point aerodynamic optimization of the rotor blade sections of an axial-flow impulse air turbine for wave energy conversionEnergy, 2012
- Enhanced multi-objective optimization of a microchannel heat sink through evolutionary algorithm coupled with multiple surrogate modelsApplied Thermal Engineering, 2010
- Thickness effect of NACA foils on hydrodynamic global parameters, boundary layer states and stall establishmentJournal of Fluids and Structures, 2010
- Multiple Surrogate Modeling for Axial Compressor Blade Shape OptimizationJournal of Propulsion and Power, 2008
- Response surface approximation of Pareto optimal front in multi-objective optimizationComputer Methods in Applied Mechanics and Engineering, 2007
- Performance of an impulse turbine with fixed guide vanes for wave power conversionRenewable Energy, 1999
- The Effect of Rotor Blade Thickness and Surface Finish on the Performance of a Small Axial Flow TurbineJournal of Engineering for Power, 1983