Morphological features and crystallization behavior of the conductive composites of poly(trimethylene terephthalate)/graphene nanosheets
Authors:
- 2 February 2016
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 133 (19)
Abstract
Poly(trimethylene terephthalate) (PTT) composites filled with well‐dispersed graphene nanosheets (GNSs) were prepared through a coagulation method. The effects of increased GNS concentration on variations in the structure and properties of the PTT matrix, such as its electrical conductivity, crystallization kinetics, melting behavior, and crystal morphology, were investigated. Several analytical techniques were used, including electrical conductivity measurement, differential scanning calorimetry, Fourier transform infrared spectroscopy, wide‐angle X‐ray diffraction, polarized light microscopy, transmission electron microscopy (TEM), and thermo‐gravimetric analysis (TGA). Electrical conductivity increased from 1.8 × 10−17S/cm for neat PTT to 0.33 ± 0.23 S/cm for PTT/GNS composites with 2.97 vol % GNS content. Percolation scaling laws were applied, and then threshold concentration and exponent were determined. In the case wherein liquid nitrogen was used to quench the melt, a mesomorphic phase was formed despite the extremely short crystallization time after adding high GNS contents. PTT crystallization rate increased with the gradual addition of GNSs. The enhanced crystallization kinetics was attributed to the high nucleation ability of GNSs to induce epitaxially grown lamellae on their surfaces, as revealed by TEM. PTT nuclei were randomly developed on the GNS surface to form the lamellae. However, crystallinity reached its maximum value near the electrical percolation threshold because the PTT chain mobility was confined after the GNS–GNS network formed. The growth of PTT banded spherulites in the bulk was still observed for composites with high GNS content, and TGA results revealed that the GNS‐filled PTT composites had excellent thermal stability. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2016,133, 43419.Keywords
This publication has 59 references indexed in Scilit:
- Realizing the enhancement of interfacial interaction in semicrystalline polymer/filler composites via interfacial crystallizationProgress in Polymer Science, 2012
- Grafting of Polyester onto Graphene for Electrically and Thermally Conductive CompositesMacromolecules, 2012
- Electromagnetic interference shielding behavior of poly(trimethylene terephthalate)/multi-walled carbon nanotube compositesComposites Science and Technology, 2011
- Real-Time Study of Graphene’s Phase Transition in Polymer MatricesNano Letters, 2009
- Poly(ethylene terephthalate)/expanded graphite conductive composites: Structure, properties, and transport behaviorJournal of Applied Polymer Science, 2008
- Development of the crystallinity and rigid amorphous fraction in cold‐crystallized isotactic polystyreneJournal of Polymer Science Part B: Polymer Physics, 2003
- Linear versus nonlinear determinations of equilibrium melting temperatures of poly(trimethylene terephthalate) and miscible blend with poly(ether imide) exhibiting multiple melting peaksJournal of Polymer Science Part B: Polymer Physics, 2002
- Infrared spectroscopic analysis of poly(trimethylene terephthalate)Polymer, 2001
- Double-melting behavior of poly(ether ether ketone)Macromolecules, 1987
- Infra-red and Raman spectra of poly(m-methylene terephthalate) polymersPolymer, 1977