Simulation study of thermally initiated rail defects
Authors:
- 4 December 2012
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 228 (2) , 113-127
Abstract
Ultrasonically detected ‘squat-type’ rail defects are becoming increasingly common on railways throughout the world. On the London Underground (LU) these defects are found on three lines. Focussing on the difference between these lines and others on the LU network has identified vehicles with modern AC traction characteristics as a common theme found only on problem lines. Metallurgical analysis of the defects found that the mechanisms for generation and growth are not consistent with conventional rolling contact fatigue, with evidence of significant thermal input. The defects are only found on open sections. The areas most susceptible to the defects are those where low-speed running is more common. A mathematical model of the traction package has been used to examine the forces and thermal input generated at the wheel–rail interface with modern wheel-spin control systems under wheel slip and adhesion recovery conditions. The outputs have been analysed to assess whether sufficient forces and temperatures are generated to explain the observed rail damage. The results suggest that under certain circumstances wheel-spin recovery generates sufficient rail surface energy for martensitic transformation. Additional modelling suggests that thermal input from wheel-spin aids crack propagation and that regions of slightly degraded (wet as opposed to leaf or oil contaminated) rail adhesion are sufficient to initiate these flaws.Keywords
This publication has 13 references indexed in Scilit:
- Studs: a squat-type defect in railsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2011
- Squats and squat-type defects in rails: the understanding to dateProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2011
- Atom probe tomography analysis of the white etching layer in a rail track surfaceActa Materialia, 2010
- Wheel–rail contact mechanics2009
- Modelling rail steel microstructure and its effect on crack initiationWear, 2008
- Calculation of temperatures in a sliding wheel/rail system and implications for wheel steel developmentProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2007
- Creep forces in simulations of traction vehicles running on adhesion limitWear, 2005
- A comparison of analytical and numerical methods for the calculation of temperatures in wheel/rail contactWear, 2002
- Investigation of white etching layers on rails by optical microscopy, electron microscopy, X-ray and synchrotron X-ray diffractionMaterials Science and Engineering: A, 2001
- A Fast Algorithm for the Simplified Theory of Rolling ContactVehicle System Dynamics, 1982