Artificial Ageing of Mortar Prisms Reinforced through Steel, Glass and Organic Fibres
- 1 September 2014
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 624, 542-550
Abstract
The process of ageing in construction materials is natural and expected, and the technologies to contrast and reverse any damage due to the passing of time are well known in the field of civil engineering. This is true for structures themselves as well as the reinforcement technologies such as, for example, fiber reinforcements (FRP or FRCM). In fact, studies [1,5] have brought attention early on to severe mechanical characteristic reduction caused by the ageing process of specific resin matrices used in composite reinforcement materials, or, even more perilous, their exposure to extreme conditions of temperature. In this project, the authors have set up an experimental campaign on mortar prisms reinforced with different types of fibers and subjected to cycles of ageing through heat exposure. This paper presents the results obtained by three point flexural testing performed at the Testing Laboratory of the University of Florence, comparing the results of the reinforced and aged prisms with those of the non-aged and non reinforced prisms, providing a precedent on how ageing influences the structural behavior of fibers and mortar.Keywords
This publication has 3 references indexed in Scilit:
- Methods of test for mortar for masonry2013
- Lifetime predictions for polymers and composites under constant loadJournal of Rheology, 1981
- The Effect of Temperature and Moisture Content on the Flexural Response of Kevlar/Epoxy Laminates: Part II. [ ± 45,0/90] Filament Orientation*Journal of Composite Materials, 1981