Damage-resistant alumina-based layer composites
- 31 January 1996
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 11 (1) , 204-210
Abstract
A new philosophy for tailoring layer composites for damage resistance is developed, specifically for alumina-based ceramics. The underlying key to the approach is microstructural control in the adjacent layers, alternating a traditionalhomogeneousfine-grain alumina (layerA) for hardness and wear resistance with aheterogeneousalumina : calcium-hexaluminate composite (layerC) for toughness and crack dispersion, with strong bonding between the interlayers. Two trilayer sequences,ACAandCAC, are investigated. Hertzian indentation tests are used to demonstrate the capacity of the trilayers to absorb damage. In the constituent materials, the indentation responses are fundamentally different: ideally brittle in materialA, with classical cone cracking outside the contact; quasi-plastic in materialC, with distributed microdamage beneath the contact. In theACAlaminates, shallow cone cracks form in the outerAlayer, together with a partial microdamage zone in the innerClayer. A feature of the cone cracking is that it is substantially shallower than in the bulkAspecimens and does not penetrate to the underlayer, even when the applied load is increased. This indicates that the subsurface microdamage absorbs significant energy from the applied loads, and thereby “shields” the surface cone crack. Comparative tests onCAClaminates show a constrained microdamage zone in the outerClayer, with no cone crack, again indicating some kind of shielding. Importantly, interlayer delamination plays no role in either layer configuration; the mechanism of damage control is by crack suppression rather than by deflection. Implications for the design of synergistic microstructures for damage-resistant laminates are considered.Keywords
This publication has 45 references indexed in Scilit:
- Damage accumulation and cyclic fatigue in Mg-PSZ at Hertzian contactsJournal of Materials Research, 1995
- Hertzian Contact Damage in Magnesia‐Partially‐Stabilized ZirconiaJournal of the American Ceramic Society, 1995
- Effect of microstructural coarsening on Hertzian contact damage in silicon nitrideJournal of Materials Science, 1995
- Cyclic fatigue of a mica-containing glass-ceramic at Hertzian contactsJournal of Materials Research, 1994
- A model for microcrack initiation and propagation beneath hertzian contacts in polycrystalline ceramicsActa Metallurgica et Materialia, 1994
- Deformation and fracture of mica-containing glass-ceramics in Hertzian contactsJournal of Materials Research, 1994
- Cracking and damage mechanisms in ceramic/metal multilayersActa Metallurgica et Materialia, 1993
- Indentation fatiguePhilosophical Magazine A, 1993
- The Hertzian stress field and formation of cone cracks—II. Determination of fracture toughnessActa Metallurgica et Materialia, 1992
- The Hertzian stress field and formation of cone cracks—I. Theoretical approachActa Metallurgica et Materialia, 1992