The Study of Structural Dynamic Response of Wind Turbine Blades under Different Inflow Conditions for the Novel Variable-Pitch Wind Turbine
Open Access
Abstract
To ensure the safe and stable operation of small and medium-sized wind turbine generators within distributed energy systems, a new active pitch adjustment method for a 1.5 kW distributed pitch wind turbine generator is proposed in this article. The stress and displacement responses of blades under uniform inflow and extreme operating gust inflow conditions were calculated and analyzed using a two-way fluid–structure coupling method. The results showed that under the two different flow conditions, as the pitch angle increased, the stress and displacement responses of the wind turbine blades both significantly decreased, and the decrease was greater with increasing wind speed. The feasibility of the proposed variable-pitch adjustment for blade load reduction under different inflow conditions was further illustrated. The peak of the blade stress response was located at the leading-edge position in the middle of the blades (0.55R) for the different inflow conditions, while the displacement response of the blades was mainly along the waving direction. Through comparative analysis of the blade stress and displacement responses at the same wind speed under different flow conditions, it was found that the maximum mean ratio of the blade displacement and stress responses reached 1.66 and 1.67, respectively.Keywords
Funding Information
- National Natural Science Foundation of China (52266013, 2021EEDSCXQDFZ009, 2024JBGS0025)
- Major Special Project of Scientific and Technological Cooperation in Ordos (52266013, 2021EEDSCXQDFZ009, 2024JBGS0025)
- Inner Mongolia Autonomous Region “Listed and Commanded” Project (52266013, 2021EEDSCXQDFZ009, 2024JBGS0025)
This publication has 26 references indexed in Scilit:
- Computational fluid dynamic and response surface methodology coupling: A new method for optimization of the duct to be used in ducted wind turbinesHeliyon, 2023
- Performance evaluation of extruded polystyrene foam for aerospace engineering applications using frequency analysesThe International Journal of Advanced Manufacturing Technology, 2023
- An examination of hub wind turbine utilizing fluid-structure interaction strategyAlexandria Engineering Journal, 2022
- Failure analysis of a composite wind turbine blade at the adhesive joint of the trailing edgeEngineering Failure Analysis, 2021
- A simple method for modelling fatigue spectra of small wind turbine bladesWind Energy, 2020
- Renewable energy can enhance resilience of small islandsNatural Hazards, 2020
- Investigation on the performance of a novel forward-folding rotor used in a downwind horizontal-axis turbineEnergy, 2020
- Transient response of the flexible blade of horizontal-axis wind turbines in wind gusts and rapid yaw changesEnergy, 2018
- An efficient procedure for the calculation of the stress distribution in a wind turbine blade under aerodynamic loadsJournal of Wind Engineering and Industrial Aerodynamics, 2018
- Failure analysis of wind turbine blade under critical wind loadsEngineering Failure Analysis, 2013