Flexural performance of reinforced recycled aggregate concrete beams
Authors:
- 1 September 2012
- journal article
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 64 (9) , 837-848
Abstract
The amount of concrete waste has increased significantly over the years due to reconstruction and the demolition of old buildings. Efforts have been made to utilise recycled aggregates to address some of the environmental problems associated with concrete waste and to promote the sustainability of concrete. A number of studies have been carried out to examine the mechanical properties, mixture design and structural performance of reinforced concrete (RC) beams comprising recycled aggregate. These studies report a reduction in strength, relatively large deflections and wider crack widths in reinforced recycled aggregate concrete beams compared with conventional concrete members. This study evaluates the flexural performance of RC beams with recycled aggregate and proposes strain limits for tension-controlled behaviour. Eight full-scale RC beams were cast using different types of recycled aggregate, including recycled fine and/or coarse aggregate, and using different grades of recycled aggregate that have different replacement ratios. This study also examines the flexural performance of reinforced recycled aggregate concrete beams in terms of crack patterns, flexural strength, ductility and failure modes. The flexural strength and material properties of the RC specimens with recycled aggregate are compared with the predicted values based on the ACI 318 code.Keywords
This publication has 3 references indexed in Scilit:
- Mechanical properties of recycled aggregate concrete under uniaxial loadingCement and Concrete Research, 2005
- Properties of concrete incorporating fine recycled aggregateCement and Concrete Research, 2005
- SUITABILITY OF RECYCLED CONCRETE AGGREGATE FOR USE IN BS 5328 DESIGNATED MIXES.Proceedings of the Institution of Civil Engineers - Structures and Buildings, 1999